Parameters
1. Lead Mode: Standard 7-lead
2. Calibration Voltage: 1mV±2%
3. Polarizing Voltage: ±500mV
4. Data Sampling Rate: 1.0ms(1000Hz)
5. A/D Converter: 12bits
6. Frequency Range: 0.05Hz~165Hz (-3dB)
7. Time Constant: >3.2s
8. Noise Level: ≤15µVp-p
9. Common Mode Rejection Ratio(CMRR): ≥100dB
10. Digital Filter: Alternating, myoelectricity, shifting
11. Sensitivity (5 shifts): Automatic, 2.5, 5, 10, 20, 40mm/mV ±5%
12. Paper Feeding Speed: 6.25, 12.5, 25, 50mm/s ±3%
13. Printing: Imported high-speed and high-sensitivity dot matrix recording system. Printing color depth is adjustable.
14. Print Format: 1, 1 1; Parameters measurement, arrhythmia analysis, and automatic diagnostic report. Measurement analysis report printing can be freely set based on actual needs.
15. Display: 3.8 inch LCD display. 6 or 7 waveforms can be synchronically displayed on one screen.
16. Power Saving Mode: 1 minute screen protection. ECG-1101 veterinary ECG monitor automatically powers off after 3 minutes without operation.
17. Storage Function: The medical equipment can store 12 electrocardiograms. SD card is optional to enlarge the storage. You can playback the stored images for printing.
18. Interfaces: RS232, USB, and network interfaces
19. Size of Record Paper: 50mm*20m
20. Weight: less than 2.3kg
21. The animals ECG monitoring device has the help function. It can be used for clinical knowledge. Also, it can show common failures and troubleshooting methods.
22. Operation Mode: Manual/automatic/arrhythmia analysis mode
23. Power Supply: AC and DC current. The animals monitoring device has a build-in rechargeable battery with intelligent charging circuit. This battery can be used for at least 2 hours. The animals medical device has automatic power off function.
24. External DC power supply can be added to the ECG-1101 veterinary ECG monitor.
25. The measurement software is dedicated for cats and dogs.
26. The medical device alarms in case of low power, paper shortage, and lead shed.
27. ECG workstation software is optional.

Basic Configuration
Machine Unit: 1 pc
Animals ECG Lead Wire: 1 set
Electrode Holder: 5 pcs
Power Wire: 1 pc
Ground Wire: 1 pc
Fuse: 2pcs
Thermal Paper: 1 coil
Small Screwdriver 1 pc
Dust Cover: 1 pc
Paper Roll: 2pcs