CLY5250GJY Liquid Tanker Truck (15-25m3)
Aside from a 230-hp engine, DFL1250A8 chassis with wheelbase of 4350 1350mm is also mounted to CLY5250GJY liquid tanker truck. The engine is in conformity with Euro III emission standard. Other options such as engines with 230-270 horse power are offered for you to choose.
The liquid tanker truck adopts the cab which is jointly developed by Donfeng Motor and NISSAN MOTOR Co., Ltd. Inside the fully equipped cab, the steering wheel is forward and backward or up and down adjusted. Power sunroof and foot rest are set to relieve the long-time driving caused fatigue. Tank of this tank truck comes with standard volume of 21m3 and optional tank volume of 15 to 25m3. It is commonly produced from carbon steel. In accordance with clients' requirements, it can be made of stainless steel or aluminum alloy. The fluid tanker truck is used to haul oil products or many other chemical liquids.
Parameters of Liquid Tanker Truck| Overall Dimension Parameters | Total length (mm) | 9560 | Mass Parameters | Max. total mass (Kg) | 25000 |
| Total width (mm) | 2495 | Rated load mass (kg) | 12500 | ||
| Total height(mm) | 3200 | Kerb mass (Kg) | 12305 | ||
| Wheel base (mm) | 4350 13504350 1300 | ||||
| Performance Parameters | Chassis manufacturer | DongfengMotors | Max. gradability(%) | ≥28 | |
| Chassis type | DFL1250A8 | Braking gradability (%) | ≥20 | ||
| Max. speed (km/h) | 90 | Min. ground clearance (mm) | 250 | ||
| Min. turning diameter (m) | 18.5 | ||||
| Chassis Configuration | Item | Standard configuration | Optional | ||
| Engine | L6, turbo-charge with intercooler, electrically controlled common rail. type: ISDe230 30(Euro Ⅲ) , Rated power: 169Kw (230Ps) | ISDe245 30 (245ps), ISDe270 30 (270ps), C230 33 (230ps), C245 33 (245ps), C260 33 (260ps) | |||
| Cultch | Single disc, dry type diaphragm spring clutch, φ430mm | ||||
| Transmission | FAST 8 speeds of gear boxes | ||||
| Rear axle | 10T double rear axle; main reduction ratio: 4.44 | 5.571 | |||
| Front axle | 7T, fist type I shaped structure | ||||
| Body frame | Rivet & composite joint structure | ||||
| Suspension system | Front spring have 8 disks, lifting hook structure, bilateral shock absorber; Rear spring have 9disks. | ||||
| Steering system | Power steering, integral power steer machine | ||||
| Braking system | Service brake: dual circuit , hanging tandem brake, drum brake Parking brake: handle valve control spring brake chamber, act on middle and rear wheel Auxiliary brake: butterfly valve electric-gas control, engine emission braking system | ||||
| Tyre | Common tyre, amount:10, type: 11.00R20 | 10.00-20, 10.00R20, 11.00-20 | |||
| Electrical system | Battery 12V 165A·h(two)/generator 28V70A/starter 24V, 7.8Kw | ||||
| Air conditioner | A/C in cab | ||||
| Cab | Low roof cab with flat-head, single sleeper and single row. | ||||
| Tank Parameter | Item | Standard | Optional | ||
| Tank volume (m3) | 21.5 | 15~25 m3 | |||
| Overall dimension of tank(mm) | 6880×2496×1560 | ||||
| Tank material | Carbon steel Q235 | ||||
| Discharge ball valve | Aluminum alloy DN80 | Stainless steel DN80, DN100 | |||
| Bottom valve | None | Stainless steel or aluminum alloy DN100 | |||
| Tank mouth | Amount: 2; material: carbon steel, diameter: Φ500 | ||||
| Discharge rubber hose | Amount: 2, length: 6.5m, ball valve accords with drift diameter | ||||
| Oil pump | 80YHCB-60 circular-arc cogwheel pump | ||||
