SY-31 Centrifugal Constant Acceleration Tester
The SY-31 centrifugal constant acceleration tester is used to examine whether the components, equipment sets, and other electronic goods suffered by the force (except gravity) at constant acceleration can offer normal operation and structural load bearing capacity in expected service environments. It can evaluate the structural integrity of some components and the electrical parameters of specimens under constant acceleration.
Functions and Features
1. Specimens can be provided with liquid, gas, and electricity in test process. The status of the specimen that bears acceleration is reappeared with reality.
2. Our centrifugal constant acceleration tester is configured with a video monitoring system to supervise the test state.
3. Its interface is remotely controlled by a fully automated computer. The testing equipment will be activated only if an operator inputs simple value. It can complete acceleration tests accurately.
4. Multi-stage acceleration consecutive tests are available on basis of different requirements of specimens.
5. This centrifugal testing machine can realize open-circuit, over-limit and over-speed protection.
6. In case of auto control failure or no auto control, the centrifugal constant acceleration tester will adopt manual control method to accomplish a test.
Technical Parameters
| Model | |||||||
| Max. Load (kg)/ Position | 30x2 | 50x2 | 100x2 | 100x2 | 200x2 | 500 | 1000 |
| Acceleration (m/s2) | 30-1000 | 30-1000 | 30-1000 | 30-1000 | 30 - 700 | 30 - 500 | 30-500 |
| Specimen Size (L×W×H: mm) | 200x200 x150 | 200x200 x150 | 400x400 x 300 | 500x500 x400 | 700x700 x700 | 1000x1000 x1000 | 1200x1200 x1200 |
| Specimen-Installed Radius (mm) | 1250 | 1350 | 1750 | 2250 | 2500 | 3000 | 6250 |
| Turning Radius (mm) | 1350 | 1500 | 2000 | 2500 | 3000 | 3500 | 7000 |
| Start Time (min) | ≤3 | ≤3 | ≤5 | ≤5 | ≤5 | ≤5 | ≤10 |
| Stop Time (min) | ≤3 | ≤3 | ≤5 | ≤5 | ≤5 | ≤5 | ≤10 |
| Continuous Working Time (min) | 60 | 60 | 60 | 60 | 60 | 30 | 30 |
| Power Consumption (kVA) | 37 | 37 | 37 | 55 | 90 | 120 | 500 |
| Dimension (mm) | Φ3500 | Φ4000 | Φ5000 | Φ6000 | Φ7500 | Φ8500 | Φ16000 |
| Current Collector (optional) | 60 ring 500V 5A | ||||||
| Weight (kg) | 2500 | 2800 | 3000 | 3200 | 8000 | 13000 | 35000 |
| Power Supply | Three-phase 380V, 50/60Hz | ||||||
| Measure and Control System | IPC control | ||||||
| Standard | GJB150 GJB360 GB/T2423 MIL-STD-810F IEC68-2-7 | ||||||
| Working Environment | Temperature range 0~40°C Humidity range ≤80% (non condensing) | ||||||
| Remark | The specimen-installed radius, current collector, and control accuracy can be configured according to relevant standard or the requirements of users. | ||||||
