Tool Bits for Self-Feeding Plate Beveller
The tool bits for self-feeding plate beveller are mainlyused for our YWM series steel plate beveller. This cuttingblade works based on the principle of milling. It comeswith a splined hole whichis used to locate the blade.
This circular bladeis made of cutting tool materials by means of later heat treating and linearcutting. It features highly rigid surface. Used tool bits can be continuouslyused for grinding. Nevertheless, when the rigid layer of the surface is groundoff for nothing left, the millingcutter can not support continuous use.
TechnicalParameters
| Max. bevel width | |
| Bevel angle | 25-45° |
| Beveling speed | 1.5 |
| Plate thickness | 6 |
| Plate width | > |
| Blade work efficiency | |
Milling Cutter for YWM-16 Self-Feeding PlateBeveller
| Max. bevel width | |
| Bevel angle | 25-45° |
| Beveling speed | 1.5 |
| Plate width | > |
Tool Bits for YWM-2046 Self-Feeding PlateBeveller
| Max. bevel width | Once feeding can make bevel |
| Bevel angle | 15-60° |
| Beveling speed | 0.5 |
| Plate thickness | 12 |
| Degree of finish | R3.0-1.2 |
| Blade | Every cutter is equipped with five blades |
| Blade work efficiency | |
