Electrosurgery System
ESU / Electrocautery System / High-Frequency Surgical Unit
CV-2000Y(C) Electro-surgery System
The electrosurgery system is microprocessor controlled with three independent liquid crystal displays.
Multifunctional unit with an electrosurgical unit, argon electrosurgical unit, ligasure unit, and plasma cut function。
The unit can be connected with various surgical instruments
Return electrode monitoring system and power peak system, minimize the risk of tissue damage.
Remote control function. The surgeon can adjust the power output with the ESU pencil.
Convection refrigeration without ventilator.
Technical Specifications:
1. Environmental temperature range: 5℃～40℃
2. Relative moisture range: ≤80
3. Atmosphere pressure range: 86.0～106.0kPa
4. Power supply: 220V±22V, 50Hz±1Hz
Electrosurgical Unit Module:
1. Rated output power:
a) Pure cut: 1W～400W (Load 800Ω)
b) Blend1: 1W～300W (Load 800Ω)
c) Blend2: 1W～200W (Load 800Ω)
d) Blend3: 1W～150W (Load 800Ω)
Mono-polar Coag
a) Spray Coag: 1W～80W (Load 800Ω)
b) Forced Coag: 1W～120W (Load 800Ω)
c) Soft Coag: 1W～120W (Load 800Ω)
Bipolar
a) Bipolar Coagulation: 1W～70W (Load 200Ω)
b) Bipolar Cut: 1W～120W( Load 200Ω)
2. Power consumption: ≤1100VA (cutting function 350W)
3. Working frequency: 512KHz
Argon Electrosurgical Unit Module:
1. Working frequency: 416KHz
2. Power Rating: 1100VA±10%
3. Rated output power:
Mono-polar Cut
a) Pure cut: 1W～300W (Load 500Ω)
b) Blend1: 1W～200W (Load 500Ω)
c) Blend2: 1W～150W (Load 500Ω)
Mono-polar Coag
a) Spray Coag: 1W～80W (Load 500Ω)
b) Forced Coag: 1W～80W (Load 500Ω)
Plasma Cut Module:
1. Rated output power:
a) Plasma bipolar cut: 1W～230W (load 800Ω)
b) Plasma bipolar coag: 1W～120W (load 200Ω)
2. Working frequency: 416KHz
3. Apply for general surgery and Urology Surgery
Ligasure Module:
1. Applicable for general surgery and minimally invasive surgeries where occlude blood vessels are not more than 7mm in diameter.
2. 6 optional effects: 40W, 60W, 80W, 100W, 120W, 140W.
3. Impedance: 20-200Ω
4. Working frequency: 512KHz
