E90T5-K2C Low Alloy Steel Flux Cored Wire
Request a Quote
The E90T5-K2C low alloy steel flux cored wire features with basic type slag system. This gas shielding basic flux cored wire incorporates with microalloying, and is highly distinguished by comprehensive mechanical properties, crack resistance and impact toughness at -50℃.
Our welding equipment shows prominence in both flat and horizontal position welding for low alloy steel or medium-carbon steel, such as 15MnMoVN, 14MnMoVB and related class. This model of low alloy steel flux cored wire is industry-proven solution to welding of key structures for pressure vessels and bridges, etc.
Standards
GB/T17493-2008 E620T5-K2C
AWS A5.20 E90T5-K2C
| C | Si | Mn | Ni | S | P | |
| Standard | ≤0.15 | ≤0.80 | 0.50-1.75 | 1.0-2.0 | ≤0.03 | ≤0.03 |
| Typical | 0.07 | 0.25 | 1.65 | 1.10 | 0.016 | 0.009 |
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) | Akv (J) (-50℃) | |
| Standard | 620-760 | ≥540 | ≥17 | ≥27 |
| Typical | 710 | 600 | 20 | 60 |
| Wire diameter (mm) | Current (A) | Voltage (V) | Gas (l/min) |
| Φ1.2 | 180-280 | 24-30 | 15-20 |
| Φ1.6 | 200-320 | 24-32 | 15-20 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
