E70T-1C Gas Shielded Mild Steel Flux Cored Wire
Request a Quote
The E70T-1C gas shielded mild steel flux cored wire is the welding consumable adopts the titanium slag and involves utilization of CO2 shielding gas. This welding wire is specially designed only for flat and horizontal position welding, and is highly capable of catering to demands for high welding speed and current.
Grounded on remarkable mechanical properties, our mild steel flux cored wire is born with high deposition rate and low spatter. Moreover, this kind of welding accessory has been proved to be ideal for butt welding and horizontal fillet welding of all kinds of steel slab with medium thickness applied in shipbuilding, bridge and vehicle, etc.
Standards
GB/T10045-2008 E500T-1
AWS A5.20 E70T-1C
| C | Si | Mn | P | S | |
| Standard | / | ≤0.91 | ≤1.75 | ≤0.04 | ≤0.03 |
| Typical | 0.07 | 0.41 | 1.48 | 0.017 | 0.012 |
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) | Akv (J) | ||
| -18℃ | -29℃ | ||||
| Standard | ≥480 | ≥400 | ≥22 | ≥27 | ≥27 |
| Typical | 610 | 530 | 26 | 55 | 44 |
| Wire diameter (mm) | Φ2.0mm | Φ2.4mm | Gas (l/min) | |
| Current (A) | Flat position welding | 250-400 | 300-500 | 15-25 |
| Horizontal fillet welding | 250-350 | 300-450 | 15-25 | |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
