Cabinet Locker

Cabinet Locker
Cabinet Locker
Request a Quote

Our electronic cabinet locker is greatly designed for various application situations. It is a waterproof lock and anti-corrosive hotel lock. Besides, it has great high temperature resistant performance. You are welcome to contact us so that we can make the right recommendations according to your requirements.

Several kinds of keycards are designed for the lock management system. So the cabinet lock is both safe and convenient.
1. The authorization card is used to issue or cancel a master card.
2. The master card is for issuing or canceling a guest card. After a master card is set on all lockers, it can serve as an opening card to open all lockers. Once it is used to unlock a door, the original keycards for this door will be canceled automatically.
Usage: contact the master card with the card reading area of a cabinet lock for 5 times continually. Then the locker will be in open status all the time until you use a master card to issue a new guest card again.
3. The guest card is for the guests to open the locker.

Card function and programming

1. Issue an anthorization card

You will hear 1 beep and the latch of the cabinet lock will retract in.
You will hear 1 beep again and the green light will be on.
Contact a new card with the card reading area of the locker.
Press the SET BUTTON at the back panel.
Switch on the power.
The authorization card is issued successfully!

Note: Once a new authorization card is issued successfully. All types of original cards will be cancelled automatically. The new card should be kept safely.

2. Anthorization card function
If you need an authorization card for all cabinet locks, use the same anthorization card on all lockers. When you want to issue a master card, contact the authorization card to the card reading area on the cabinet lockset. When green light is flashing, then put a new card onto the card reading area. You will hear 1 beep and the green light will be on. The master card now is issued successfully.

3. Master card function
To issue a guest card, put a master card onto the card reading area on the cabinet lock. When green light is flashing, repeat the above move once again with a new card. Then you will hear 1 beep and the green light will be on, indicating the guest card is issued successfully.

Note: Once new Master card is issued Ok, all types of old cards are cancelled automatically, it should be kept safely.

4. Issue a guest card to 3 lockers
Contact the same card to the card reading areas of 3 cabinet locks separately, you will get a guest card to 3 lockers.

Related products
Send Message
Other Products
Inquiry
Inquiry