With a built-in GSM antenna, model G1 super touch-screen alarm system can receive and transmit GSM signals at 4 frequencies including 900, 1800, 850, and 1900MHz which makes it suitable for worldwide uses. Up to five display languages are installed in the intelligentmultilanguage alarm module: English, Spanish, Russian, Germany, and Chinese. You can change the langue through the SMS command. If you speak Russian, for example, then you should send the SMS command “1234LG.3” to the alarm control panel to enable the language switch. Presented below are some other desirable features found on this touch screen alarm system.

1. SMS alert. If any wireless sensor is triggered, the GSM touch screen alarm module (control panel) will send SMS messages to preset cell phone numbers for alerting the users, e.g. the magnetic door sensor, PIR motion detector, etc..
2. SMS report during arm/disarm through remote controllers. When the touch screen alarm system is activated or disabled via remote controllers, it would give you a quick update on the changed status of the system through SMS messaging.
3. The name for each wireless or wired zone (from 01 to 10) can be changed by SMS commands.
4. SMS command for remote control with no distance limit.
5. Independent zone set-up allows for separate activation or disarm of the touch screen alarm system.
6. Two ways communication: Requires an external speaker for two-way communication between the speaker and user's mobile phone
7. User-friendly voice reminder makes a sound every time users press down the key on the keypad.
8. Voice recording function that pre-records a speech to the alarm panel and starts to play the speech when the alarm module calls you. The pre-recorded speech can be something like "office's kitchen smoke sensor", "parents' living room PIR sensor" etc.. You can DIY your speech freely, but within 10 seconds.
9. System activation time delay for 30seconds gives you enough time to walk out of the house and close your door without tripping any sensor.
10. Accommodate numerous wireless remote controllers, wireless sensors, and 2 or 3 wireless flashing sirens
11. 2 wired zones are used for connecting wired sensors to the touchscreen burglar alarm module via landlines without distance limit. The wired fence detector, beam smoke detector for electric enclosure, and PIR motion sensor are all installed far from the central alarm module.
12. SOS distress signal for help. In event of emergency, you can press the panic button on the alarm module, remote controllers, or the standalone panic button to activate the alarm system instantly calling for help regardless of the present status of the alarm.
13. AC/DC power automatic switch function allows the touch screen alarm system to switch to the backup battery in case of AC power outage. The battery is rechargeable when the AC power supply is functional.
14. SMS alert & auto-dial alert in the event of AC power outage or recovery.
15. iOS security app or Android security app is available, which would put your home, office, or other monitored areas at your fingertips.

Technical Specifications
GSM frequency: 900/1800MHz (standard), 850/1900MHz (optional)
Wireless frequency: 315MHz/433MHz for optional
Alarm response time: ≤8s (GSM signal in normal state)
Power requirements: AC 220V 50Hz/60Hz
Power supply: 12V 1A
Working consumption: < 0.6W
Backup battery: DC7.4V/850MA, lithium battery
Backup battery working hours: ≥10 hours
Operating conditions
Temperature: -20℃~ 60℃
Relative humidity: ≤95% (non-condensation)
Size: 150mm(L)×100mm(W)×16mm(H)
Voice recording time: 10s

Components
1×GSM alarm module (or control panel)
4×Wireless Remote controllers
4×Wireless PIR motion detectors
4×Wireless door/window magnetic sensor
1×Wireless smoke detector
1×Wireless gas detector
1×Mini siren with 110DB sounds
1×Power adapter
1×English user manual
1×Brand new & anti-static package box