G1 (Standard) Touch Screen Alarm System
Model G1 touch screen alarm system comes standard with 12 wireless zones and 2 wired zones. It also has specialized zones for emergency calls and fire hazard detection. Via SMS messaging or making phone calls, users can send commands to activate or disable the SMS security alarm. Each detection zone can be configured independently by operating the voice alarm module. Upon arm or disarm, the alarm module would automatically start to play a ringtone to inform users. More desirable features can be found in the list below.
1. When the alarm sounds, the system would automatically send SMS messages or make phone calls to 3 pre-set mobile phone numbers.
2. Upon receiving a call from the alarm module, users can start the real-time audio function so that they can listen live to whatever is happening in the monitored areas.
3. The 2-way intercom function also can be added to the alarm system upon your request.
4. Via SMS messaging as well as voice messaging, the alarm module let users get a quick, real-time status of the monitored areas.5. The alarm module would produce a sound with each touch on it.
6. Inform users of external power supply failure and recovery. When power outage is experienced, the alarm system would switch to the rechargeable li-ion back-up battery for power.
7. This GSM-based wireless alarm can connect to the central monitoring center.
Technical Specifications
GSM signal frequency: 850/900/1800/1900MHZ (with quad-band suitable for worldwide use)
Alarm response time: ≤8s (GSM in normal state)
Power supply
Voltage: AC 220V 50Hz/60Hz
Standby power:<0.6W
Backup battery: DC7.4V/850MA
Battery working life: ≥10h
Operating conditions
Temperature:-45~ 60℃ Relative humidity: ≤95% (without condensation)
Voice recording time: 10s
Dimensions: 150mm(L)×100mm(W)×16mm(T)
Standard Components
1×G1 intelligent alarm module
1×Wireless PIR sensor
1×Wireless magnetic door sensor
2×Metal remote control
1×External siren
1×Power adapter
1×Built-in rechargeable li-ion battery
1×User guide
