RC10-22 Wood Veneer Lathe Controller
The RC10-22 wood veneer lathe controller takes high-performance single-chip CPU as the core. Equipped with this veneer lathe automatic control system, the machine will be characterized by high precision and stability.
Features of Wood Veneer Lathe Controller
1. Full digital control system with CPU as the core.
2. By the use of advanced algorithm and compensation, the peeled wood veneer will be precise, uniform in thickness, and complete in shape.
3. The wood veneer lathe controller takes the rotary encoder as the distance measuring sensor. The measurement precision can be improved to be 0.01 mm.
4. The actual speed of the roller is measured by the rotary encoder, so the cutting thickness errors cause by grid voltage instability can be avoided.
5. The touch-type, two-stage automatic acceleration / deceleration mode makes it easier to set the value.
6. English and Chinese are both supported by the high-end 128×64 LCD display, which makes the operation more convenient.
7. Frequencies can be given via RS485 communication. The error rate is greatly reduced.
8. The veneer lathe control has a variety of operating patterns, which enable the veneer peeling automation and effectively guarantee the safety of the operator.
9. Sensors are subject to a variety of combinations, to best meet different requirements.
10. The rotation direction of roller is under real-time monitoring. If the rotation reverses, the machine will stop and give alarms to reduce loss.
11. Regardless of whether the lathe is in peeling operation, the cutting thickness can be easily adjusted.
12. During power-down, the wood veneer lathe controller can continue to work without self-test, which greatly facilitates the use.
13. Built-in two control schemes for spindle and spindleless veneer lathe.
