YYG Series Centrifugal Pump
About YYG
The YYG series centrifugal pump is manufactured strictly in compliance to the ISO 2858 standard. It is a single-stage single-suction vertical centrifugal pump, which has good quality and high performance. The suitable medium is clear water or other liquids with physical characteristics similar to clear water.
This booster pump can be used in industry and city water supply system, building water pressure boost, garden irrigation, fire fighter pressure boost, long distance water supply, heating, circulation water base, etc.
Main specifications
Flow rate: 1.5-2400m3/hr
Head: 8m-150m
Working Conditions
1. The maximum working pressure of the centrifugal pump system is 1.6MPa, and the maximum head can be 160m. Please notify the pressure for the system at work when ordering. It should be otherwise noted if the working pressure is larger than 1.6 MPa, or the inlet pressure is larger than 0.4Mpa, so as to use cast steel material for the overflow and joint parts.
2. Proper medium: the medium for pure water pumps should be non-corrosive liquid in temperature below 80℃. The volume of non-melting solid in the medium should not be over 0.1% of the unit volume and the graininess should be less than 0.2mm. Please notify at order if the medium to be used has tiny grains.
3. To ensure that the centrifugal pump can work normally, the ambient temperature should not be above 40℃, and the relative humidity should below 95%.
