Single Mode/Multimode Media Converter
The media converter from HiOSO is a conversion tool used to perform mutual conversion between single mode and multimode. It can also accomplish mutual conversion between 850nm and 1310nm wavelength. In addition, this product can realize signal trunking so as to extend the transmission distance of signals in multi-mode fiber.
Characteristics of the Single Mode or Multimode Media Converter
1. Protocols supported include 155Mbps ATM/SDH, IEEE802.3u 100BASE-FX, and FDDI.
2. The 1000M single mode or multimode media converter supports IEEE802.3z 100base-sx/LX.
3. Support full-duplex and half-duplex network communications.
4. This networking device can realize conversion between 850nm multi-mode fibers and 1310nm/1550nm single-mode fibers.
5. Support direct and transparent transmission of packets in different lengths.
6. Support transmission of ultra-long packets over VLAN tag.
7. Owing to low power consumption and low heat dissipation, the product can work stably for a long time.
8. Support dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, so as to meet the extended requirements of users.
Application of the Single Mode or Multimode Media Converter
1. The Ethernet equipment is applicable to 155MbpsATM/SDH/fast Ethernet network/FDDI optical network with long-distance transmission.
2. It is also suitable for 100Mbps optical Ethernet network with long-distance transmission.
| Model: | |
| FC155F series ATM single/multi-mode converters are applied to 155Mbps ATM, SDH and 100Mbps fast Ethernet network with hybrid wiring of single-mode and multi-mode fibers. | |
| Model: | |
| FC1000F series single/multi-mode converters are applied to 1000Mbps Gigabit Ethernet network with hybrid wiring of single-mode and multi-mode fibers. |
| Parameters | Specifications |
| Access Mode | 155Mbps (100Mbps) or 1000Mbps (1250Mbpc) |
| Standard | FC155F: 155Mbps ATM/SDH, IEEE802.3u 100Base-FX Fast Ethernet, FDDI FC1000F: IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.1pQoS, IEEE802.1d Spanning Tree |
| Wavelength | 850nm, 1310nm, or 1550nm |
| Transmission Distance | Dual-fiber multi-mode: 155M 2km 1000M 220m (fiber size: 62.5/125μm) or 550m (fiber size: 50/125μm) Dual-fiber single-mode: 25/40/60/80/100/120km |
| Port | One multi-mode fiber port: Multi-mode-SC (fiber size: 50,62.5/125μm) One single-mode fiber port: Single-mode- SC fiber port (fiber size: 9/125μm) |
| Conversion Mode | Medium conversion |
| Delay | <0.3μs |
| Bit Error Rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | PWR (power) SM LINK (single-mode fiber link) MM LINK (multi-mode fiber link) |
| Power | AC220V 0.3A/DC-48V 0.5A |
| Power Consumption | 3.5W |
| Operating Temperature | -10~55°C |
| Operating Humidity | 5%~90% |
| Storage Temperature | -40~70°C |
| Storage Humidity | 5%~90% (non-condensing) |
| Dimensions | 26mm (H)*85mm(W)*135mm(D) / (height * width * depth) (built-in power) 110mm(H)*22mm(W)*81mm(D) / (height * width * depth) (module card) |
| Model | Rate (Mbps) | Conversion Mode | Operating Wavelength (nm) | Multi-mode Transmission Distance | Single-mode Transmission Distance | Fiber Interface | Power |
| 155 | Multi-mode to single-mode | 1310-1310 | 2km | 25/40/60km | SC | AC220V/ DC-48V | |
| 155 | Multi-mode to single-mode | 1310-1550 | 2km | 80/100/120km | SC | AC220V/ DC-48V | |
| 155 | Multi-mode to single-mode | 1310-1310 | 2km | 25/40/60km | SC | Module card DC5V | |
| 155 | Multi-mode to single-mode | 1310-1550 | 2km | 80/100/120km | SC | Module card DC5V | |
| 1000 | Multi-mode to single-mode | 850-1310 | 220m /550m | 10/20/40 km | SC | Built-in AC220V/ DC-48V | |
| 1000 | Multi-mode to single-mode | 850-1550 | 220m /550m | 60/80/100km | SC | Built-in AC220V/ DC-48V | |
| 1000 | Multi-mode to single-mode | 850-1310 | 220m /550m | 10/20/40 km | SC | Module card DC5V | |
| 1000 | Multi-mode to single-mode | 850-1550 | 220m /550m | 60/80/100km | SC | Module card DC5V |
