Electrical Parts
Are important electrical parts, and they can be customized in our factory if corresponding drawings are offered.
1. Inner Reducer Box Body
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra6.3
e. Performance: High hardness (HRC55 after tempering)
2. Impact Block
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra3.2
e. Performance: Good hardenability, excellent plasticity, no temper brittlement, suitable for welding and cutting
3. Brake Lever
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra3.2
e. Performance: Outstanding in strength, hardness and dimensional accuracy
4. Clutch Plate
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra3.2
e. Performance: Good plasticity, toughness and mechanical strength
5. Yoke Plate
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra3.2
e. Performance: Excellent mechanical property
6. Locking Pawl
a. Manufacturing Technique: Combination of silica sol casting and water glass casting
b. Material: Cast steel (45#)
c. Tolerance: CT6
d. Surface roughness: Ra3.2
e. Performance: Adjustable hardness (by tempering)
