Pipe Reducer
A pipe reducer is one of chemical pipe fittings. It is mainly used to joint two pipes of different diameters. N-STEEL pipe reducer is available in two types, i.e. concentric reducer and eccentric reducer. The former is used for jointing vertical pipes while the latter is for horizontal pipes.
This steel pipe fitting is perfect for different areas. Specifically, it can play an ideal role when the fluid flow rate is required to be changed. In addition, the pipe reducer is suitable for pump inlet to prevent cavitation.
Size
Seamless straight cross: 1/2"~32"DN15~DN800
Welding straight cross: 6"~60" DN150~DN1500
Wall Thickness
SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, SCH5s, SCH20s, SCH40s, SCH80sMax. Wall thickness: 200mm
Available Materials
Carbon steel: ASTM/ASME A234 WPB-WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70
Standards
ASME B16.9-2007, ASME B16.25-2007
MSS SP 75-2008, MSS SP 43-2008
CSA Z245.11-05-2005
EN10253-1-1999, EN10253-2-2007, EN10253-3-2008, EN10253-4-2008
DIN2615-1-1992, DIN2615-2-1992
BS1640-1-1962, BS1640-2-1962, BS1640-3-1968, BS1640-4-1968, BS1965-1-1963
GOST17376-2001
AFNOR NF A 49-289-1990, AFNOR NF A 49-170-1-1999, AFNOR NF A 49-170-2-2009, AFNOR NF A 49-170-3-2009, AFNOR NF A 49-170-4-2009ISO3419-1981, ISO5251-1981
JIS B2311-2009, JIS B2312-2009, JIS B2313-2009
Industrial Processes
Bending, squeezing, pressing, forging, machining, etc.
| Production range | ||
| Seamless reducer | Welding reducer | |
| Outside diameter | 1/2"-32" | 6"-60" |
| Wall thickness | 4mm-200mm | |
| Product type | Concentric reducer, eccentric reducer | |
