Washing and Cleaning Truck
Introduction to Washing and Cleaning Truck
The AD5150GQX washing and cleaning truck is a multifunction cleaning equipment that integrates functions of road surface cleaning, dust suppression by spraying, billboard cleaning, sprinkling, irrigating, firefighting, sewage pipe dredging, industrial container cleaning, etc. This pressure washer not only has ordinary sprinkling function, but also has high and low pressure water cleaning systems that are independent from each other.
The washing and cleaning truck is equipped with Euro IV 8 ton chassis, front jet, front sprinkler, rear jet, rear sprinkler, and hoist.
Features of Washing and Cleaning Truck
1. The tank has been through advanced anti-corrosion treatment, with built-in overflow tube, level gauge, and low water level alarm;
2. Low pressure water cleaning system has pavement flushing, pavement sprinkling, green belt watering, and firefighting functions;
3. High pressure water cleaning system has front flushing, left-and-right corner jetting, dust suppression by spraying, hand-held gun spraying and pipe dredging functions;
4. The washing and cleaning truck uses high-power self-priming centrifugal pump with large flow and high head;
5. The high pressure washer has front sprinkling and rear flushing function, with washing widths up to 20 meters. The function is controlled by pneumatic ball valve, and the operation can be completed in the cab;
6. The front jetting device is telescopic and tiltable left and right. The rear gun can rotate in 360 degrees;
7. The high-pressure pump has safety valve and relief valve dual protection;
8. Each nozzle of high pressure water cleaning system uses imported parts, which enable fine particle spraying in a large range.
Parameters of Washing and Cleaning Truck
| Main Structure | Main Parameters |
| Chassis | Model: EQ1141KJ - Dongfeng cargo truck chassis Power: 136Kw/2500rpm Drive type: 4 × 2 |
| High pressure watercleaning system | Cleaning width :2.5-3.5 mm Swinging angle: 30 ° left and right Maximum cleaning water flow: 135L / min Maximum spraying water flow: 135L / min High pressure cleaning capability: 28000m2 / h High pressure cleaning speed: 0 ~ 15 Km / h Vice engine power: 60kw Maximum water cleaning pressure: 20mpa |
| Low pressure watercleaning system | Low-pressure sprinkling flow :700-900L / min Sprinkling width: more than 16m Gun range: more than 30m |
| Water tank | 4.1 tank capacity: 9 m 3 |
JRM is a professional road machinery manufacturer in China. Welcome to contact us to get the best road construction and maintenance solutions.
