Snow Removal and Deicing Truck
Introduction to Snow Removal and Deicing Truck
The multi-functional snow removal and deicing truck is a purely mechanical snow removal vehicle that is capable of plowing, scraping, sweeping snow and breaking ice.
The snow removal and deicing truck is constructed on the HOWO Euro IV chassis. A vibratory snow plow is equipped at the front end, destroying the hard ice layer from the bottom and effectively removing compacted snow. Two vibratory icebreaker rollers are mounted at the middle section, performing lateral and longitudinal impact crushing on the ice surface, thus improving the efficiency of breaking compacted snow layer. The rear end of the snow removal truck has powerful roller brush and swing brush to do the thorough cleaning to get rid of the snows and ices. Power and hydraulic systems are installed in the upper part of the frame, sufficiently powered by two high-power diesel engines. All operations can be completed in the cab, which can meet the deicing requirements of various roads.
Features of Snow Removal and Deicing Truck
1. Snow plow clears snows by horizontal impact, while pushing them to the side of the road.
2. Front icebreaker roller performs vertical milling on the ice layer.
3. Rear icebreaker roller performs transverse cutting and crushing on the ice layer, breaking the ice in high efficiency.
4. Strong steel wire roller brush clears the broken ices and throws them to the roadside.
5. Rear swing brush sweeps the road and throws residual ices left to the roadside.
Parameters of Snow Removal and Deicing Truck
| No. | Main Structure | Main Parameter |
| 1 | Chassis | ZZ3257N4147D1, Power 249KW. Drive Type: 6 × 4. Maximum speed: 78Km / h. |
| 2 | Power system | Two 132KW independent engines and full-power power take off. |
| 3 | CXFZ horizontal impact snow plow | Length × width × height: 3280 × 1700 × 1036 mm. Swing angle: ± 30 ° Snow width: 2840-3280mm. Avoidance height: 150mm. Weight: 2000Kg. |
| 4 | Vibratory double icebreaking roller | Four hydraulic motors, each hydraulic motor provides a maximum torque of 900N·M. Icebreaker roller length: 2400mm. Icebreaker roller diameter: 400mm. Icebreaker roller speed: 290r/min or more. Icebreaker roller maximum torque: 1800N·M. Icebreaker roller has a vibration function, and the vibration force can reach more than 5t, which maximizes icebreaking capability without hurting the road. Icebreaker roller has float function to maintain a constant pressure depending on the road conditions. |
| 5 | Powerful rear roller brush | Driven by double hydraulic motor. Spiral steel wire type. Brush length: 2400mm. Brush diameter: 600mm. Speed: 290 r / min or more. Maximum torque: 1800N·M |
| 6 | Rear swing brush | Brush diameter: 800mm. Brush length: 3300mm. Brush speed: 290r/min or more. Maximum torque: 1800N·M Hydraulic motor driven rotary bearing to achieve swinging motion, in swing angle of 0 ° -25 °. |
| 7 | Hydraulic system | Maximum system pressure: 20Mpa. Pump displacement up to 125ml / r, with suction filter. |
| 8 | Warning device | Body with reflective logo. Long rows of lights. Double-headed arrow lights. |
JRM is a professional winter maintenance equipment manufacturer in China. Welcome to contact us to get the best solutions to improve winter road conditions.
