Wall Traveling Jib Crane
| Name | Wall Traveling Jib Crane |
| Model | BQS |
| Lifting capacity | 0.2-5t |
| Lifting height | 3-6 m |
| Service class | A3 |
| Ambient temperature | -25℃~ 40℃ |
Brief Description
The wall traveling jib crane, or called wall cantilever jib crane consists of a straight jib boom which attaches to a vertical rotary shaft. The vertical shaft is mounted on a horizontal rail, through which the entire boom crane can travel forward or backward, providing long lateral movement of materials without taking up floor space or interfering with large overhead cranes. In addition, the hoist can lift up and down.
Due to the vertical shaft, our wall traveling jib allows a horizontal rotation with the maximum angle of 180 degrees. Therefore, this hoisting equipment enables you to make the best use of the workshop space and thereby increase overall plant productivity.
YUNTIAN, as a china-based specialist industrial cranes manufacturer, offers the most competitive wall traveling jib cranes. The lifting capacity ranges from 0.2t to 5t, and lifting height 3m to 6m. Three phase A.C power supply of 380V/50Hz should be used.
Technical Parameters of Wall Traveling Jib Crane| Model | Capacity (kg) | R2 (m) | R1 (m) |
| | 250 | 3-6 | 0.9 |
| | 500 | 3-6 | 0.9 |
| | 1000 | 3-6 | 1.1 |
| | 2000 | 3-6 | 1.3 |
| | 3000 | 3-6 | 1.6 |
| Control ways | Pendent line control, remote control |
| Electrical parts | SCHNEIDER, SIEMENS, CHINT |
| Motor | XINDALI, JMU, ABM. ABB, WEG. SIEMENS or any special specified |
| Reducer | TAILONG, TAIXING, SEW or any special specified |
| Service class | A3 |
| Overload limiter | YES/NO |
| Audible and visual alarm | YES/NO |
