JR-9000 Hybrid Operating Table
The JR-9000 hybrid operating table is designed with advanced electromechanical transmission technology. Its face plate is integrally made of carbon fiber. Capable of realizing both vertical and horizontal movement, this medical equipment is suitable for use with various medium or small C-arm machines for performing angiography.
Features of Hybrid Operating Table
1. This operating room equipment has passed the test conducted by German TUV according to EU standard. It has obtained the CE marking.
2. Equipped with a precision imported micro-motor, our C-arm table runs smoothly and stops accurately.
3. The precision imported linear guide further guarantees stable operation.
4. Flexible to operate, the control handle makes it easy to control the horizontal movement of the X-ray table. The sensitive brake system also ensures high safety.
5. Made of ABS with anti-glare treatment, the table base is impact-resistant, and it is easy to clean and disinfect.
6. With large-diameter casters dedicated for medical use, the operating table is mobile and flexible. Floor cleaning is also easy.
| Table Panel | |
| Material | Carbon fiber |
| Overall length | 2500±10mm |
| Length of X-rayed section | 1750±10mm |
| Total width (including side rail) | 685±5mm |
| Width of X-rayed section | 465mm |
| Thickness | 35mm |
| X-ray absorption coefficient (aluminum equivalent) | ≤0.44mmAL |
| Maximum load | 240kg |
| Lateral Movement (Electric) | |
| Stroke | 250±20mm |
| Locking device | Electromagnetic lock |
| Longitudinal Movement (Manual) | |
| Stroke | 820±20mm |
| Locking device | Electromagnetic lock |
| Max. outreach of head plate | 1880±20mm |
| Max. outreach of leg plate | 1050±20mm |
| Vertical Movement (Electric) | |
| Minimum height from the ground | 750±20mm |
| Maximum height from the ground | 1100±20mm |
| Stroke | 350±20mm |
| Average speed | 8mm/s |
| Table Surface Control | |
| Bed lifting / horizontal movement / lock | Controller |
| Power Supply | |
| Single phase AC | 220VAC, 50/60Hz |
| Maximum power input | 300VA |
| Fuse | F5AL250V(5×20mm) |
| Net Weight | 390kg |
| Note: The technical parameters of our operating table are subject to change without notice. | |
