JR-9000E Operating Table for ERCP
The JR-9000E operating table is specially designed for the endoscopic retrograde cholangiopancreatography (ERCP). It adopts the advanced electromechanical drive technology and the table panel, made of carbon fiber, can be lifted, tilted, and horizontally moved. Used together with a mobile C-arm machine, this surgical table helps deliver accurate, clear imaging.
With nice appearance, fine craft, and flexible operation, this operating table is an ideal matching unit for the C-arm machine from Philips or Siemens to perform ERCP.
Features of Operating Table for ERCP
1. Equipped with a precision micromotor imported from German Dunkermotoren, our operating table runs smoothly in a uniform speed and stops accurately at the required position.
2. The table panel is made of carbon fiber which is characterized by low X-ray absorption coefficient, so high-resolution imaging results are obtained. Also, the feature of low X-ray absorption coefficient extends the service life of the tube, battery, and other main parts of imaging equipment while greatly reducing the damage caused by X-ray radiation on the patient and medical staff.
3. Our operating table is specially designed with a tilting function for ERCP. This allows for barrier-free fluoroscopy without turning the patient.
4. The precision linear guide imported from South Korea furthers ensures the stable operation of the ERCP table.
5. Precise and stable microcomputer control is adopted. American standard multi-strand wires shield the external signals.
6. The table base is made of ABS with anti-glare treatment. With impact resistance, it is easy to clean and disinfect.
7. The control handle, used to control the horizontal movement of the C-arm table, is flexible to operate.
8. The brake system is sensitive, which guarantees high safety.
| Table Panel | |
| Material | Carbon fiber |
| Overall length | A type: 2300±10mm×600±10mm B type: 2500±10mm×465±10mm |
| Length of X-rayed section | A type: 1680±5mm B type: 1880±5mm |
| Total width (including side rail) | 770±5mm |
| Min. X-rayed width | 450mm |
| Thickness | 35mm |
| X-ray absorption coefficient (aluminum equivalent) | ≤0.44mmAL |
| Maximum load | 240kg |
| Lateral Movement (Electric) | |
| Stroke | 250±15mm |
| Locking device | Motor lock |
| Longitudinal Movement (Electric) | |
| Stroke | 780±20mm |
| Locking device | Motor lock |
| Max. outreach of head plate | 1680±20mm |
| Max. outreach of leg plate | 1020±20mm |
| Vertical Movement (Electric) | |
| Minimum height from the ground | 800±20mm |
| Stroke | 300±20mm |
| Average speed | 8mm/s |
| Head/Leg Tilting (Electric) | |
| Tilting range | -18°±2°/ 18°±2° |
| Side Tilting (Electric) | |
| Tilting range | -15°±2°/＋15°±2° |
| Caster Control | Four caster, electrically lock and unlock |
| Power Supply (Imported from COSEL) | |
| Single-phase AC power | 220VAC, 50/60Hz |
| Maximum power input | 300VA |
| Fuse | F5AL250V(5×20mm) |
| Net Weight | 390kg |
| Note: This operating table is subjected to continuous improvement, so its parameters are subject to change without notice. | |
