Raw Edge V-Belts
For the production of our raw edge V-belts we have adopted a high quality Japanese synthetic chloroprene rubber (CR). We have also add many rubber auxiliary materials to our cut edge V-belt for different purposes, for instance, premium polyester tension wire is used to strengthen the internal framework of the belt; and a blend of fibers are applied to the back for further protection.
When compared to wrapped V-belts, our raw edge V-belts have teeth at the bottom and can reduce the accumulation of heat or stress concentration, which can help to extend the service life of our transmission belts. Our cogged V-belt only has very little tolerance for movement when used in high-speed transmission.
Design Features of Raw Edge V-Belts
1. Raw edge, molded and cogged
2. Fiber-filled base
3. Polyester tension wire
Product Features of Raw Edge V-Belts
1. Our industrial V-belts can adapt to high power rating and small pulley diameters.
2. Having good abrasion resistance and skid resistance, our raw edge V-belt runs smoothly and reliably.
3. Our maintenance-free moulded cogged V-belt has excellent tensile strength and low drawing force.
Models and Specifications of Raw Edge V-Belts
| Classical V-Belt | Narrow V-Belt | ||||
| DIN2215 | DIN7753 | USA-Standard | |||
| Section | Dimension (mm) (W×H) (Appr.) | Section | Dimension (mm) (W×H) (Appr.) | Section | Dimension (mm) (W×H) (Appr.) |
| 10×6 | 9.7× 8 | 9×8 | |||
| 13×8 | 12.7×10 | 15×13 | |||
| 17×11 | 16.3×13 | ||||
| 22×14 | 22×18 | ||||
| 32×20 | |||||
