Roughing End Mills
Roughing end mills, with helical grooves that help remove chips, are mainly categorized into square roughing end mills and ball nose roughing end mills.
Advantage
1. The helical groove end mill uses smooth, fully-ground flutes remove a large amount of material at a time, making it ideal for fast cutting of metals. This multifunctional cutter can also do rough finishing of wood.
2. Aside from our standard models, we also make custom roughing end mills and help repair and sharpen these tools.
Application
2 Flute Square Roughing End Mill
Rough finishing of wood, engineering plastics, aluminum alloy, etc.
3 Flute Square Roughing End Mill
Profile milling of solid wood, hard wood, magnesium alloy, copper alloy, etc.
Rough finishing of mold cavity.
4 Flute Square Roughing End Mill
Profile milling of medium carbon steel, alloy steel, etc.
Rough finishing of mold cavity
5 Flute Square Roughing End Mill
Profile milling of cast iron and cast steel
Rough finishing of mold cavity
Note: This model is able to remove a large amount of material in a short time, and is efficient and long lasting with a low production cost.
Ball Nose Roughing End Mill
Rough finishing of slots
| Cutter diameter (mm) | Shank diameter (mm) | Cutting length (mm) | Total length (mm) |
| 5 | 6 | 15 | 50 |
| 6 | 6 | 15 | 50 |
| 8 | 8 | 20 | 60 |
| 10 | 10 | 25 | 75 |
| 12 | 12 | 30 | 75 |
| 14 | 14 | 30 | 83 |
| 16 | 16 | 40 | 100 |
| 18 | 18 | 40 | 100 |
| 20 | 20 | 45 | 100 |
| 25 | 25 | 45 | 110 |
| Serial Number: EC444034 | |||
| Cutter diameter (mm) | Shank diameter (mm) | Cutting length (mm) | Total length (mm) |
| 5 | 6 | 15 | 50 |
| 6 | 6 | 15 | 50 |
| 8 | 8 | 20 | 60 |
| 10 | 10 | 25 | 75 |
| 12 | 12 | 30 | 75 |
| 14 | 14 | 30 | 83 |
| 16 | 16 | 40 | 100 |
| 18 | 18 | 40 | 100 |
| 20 | 20 | 45 | 100 |
| 25 | 25 | 45 | 110 |
| Serial Number: EC444234 | |||
