Waveguide Dehydrator (Dehydrator for Satellite Communication System)
Request a Quote
The waveguide dehydrator is an important piece of support equipment for satellite communication systems engineering. Dehydrators are mainly used for microwave stations, radar stations, satellite ground stations, radio and TV transmitting stations. This waveguide pressurization system can maintain dry air pressure in the communication feed line or cable automatically in order to keep out air moisture and water in order to ensure the quality of the transmission signal.
Characteristics of the Waveguide Dehydrator
1. Automatically fills the feeder line system with dry air
2. Maintain a certain pressure to prevent the system from external moisture and water
3. Small size
4. High reliability
5. Easy installation
6. Simple operation
| Type | | |
| Operating pressure | 2.5 ~ 30KPa adjustable | 2.5 ~ 30KPa adjustable |
| Operating voltage | AC 220V±10%. 50~60Hz | DC 48V±15% |
| Host tightness | After 24 hours pressure maintaining, the pressure has dropped less than 3KPa | |
| Noise | ≤45dB(under inflated) | ≤45dB(under inflated) |
| Max air flow | 15.litre/min | 15. litre/min |
| Air supply outlet | 4 | 4 |
| Power consumption | Inflated 30VA pressure maintaining 5VA | Inflated 30VA pressure maintaining 5VA |
| Mtbf | 30000 hours | |
| Size | 370×260×120mm ( width ×length ×depth ) | |
| Weight | About 8kg ( including desiccant and accessory ) | |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
