Wet Wire Drawing Machine (23 Drawing Dies)
For manufacturers of steel wires, springs, steel cords, and spoke wires, Donghang's wet wire drawing machine with 23 drawing dies is a great choice. This wire drawing line is designed for drawing low, medium and high carbon metal wires of Φ0.8-2.0mm. Its maximum drawing speed reaches up to 18m/s.
Features of the 23 Die Wet Drawing Machine
1. The wet wire drawing machine uses spools with a diameter of more than 300mm. We offer corresponding spools per the customer's requirement.
2. This multiwire drawing machine comes with a state-of-the-art PLC control system which features a wire fracture protection function, ensuring stable operation.
3. A counting meter accuracy that is less than 1‰ and correction factor enable a consistent range even after adjustment.
4. Compared to traditional drawing machines, this wet drawing machine is affordable, takes up less floor space, and is less labor-intensive.
| Finished wire diameter | Drawing speed |
| 0.20, 0.22 | 16-18m/s |
| 0.175 | 13-16m/s |
| 0.24, 0.25, 0.225 | 14-16m/s |
| 0.33, 0.35 | 10-13m/s |
| 0.30 | 13-15m/s |
| 0.15 | 11-12m/s |
| Inlet wire diameter | 0.8-2.0mm |
| Finished wire diameter | 0.15-0.35mm |
| No. of wire drawing die | 23 |
| Drawing speed | Max. 18m/s |
| Step pulley structure | Split type four step pulleys; diameter: ±0.5mm |
| Payoff spools | Basic φ800mm spool (Size can be customized as needed) |
| Pay-off method | Pneumatic pay-off (passive), with tension and air pressure adjustment |
| Take-up braking device | Pneumatic brake |
| Main motor | AC Variable frequency motor, 22 or 30Kw |
| Electric control mode | PLC control, multifunctional automatic protection |
| Step pulley surface condition | Coated with WC; HRC60-62; 1.5 years warranty |
| Die size | φ28×15, two point adjustment |
| Lubrication and cooling method | Submerged lubrication and circulation cooling |
| Lubrication box capacity | 750L |
