Wheel Loader, FL955F-II
Introduction of complete machine and product's working condition
LOVOL FL955F-II is redesigned under European technology on the original FL955F model after full investigation of end user’s needing. Compared to other short wheel base models, this model is with bigger breakout force, track force and high working stability; Compared to other long wheel base models, this model is with small turning radius, high driving speed, and high efficiency. It can be used for coal, construction and light industry. It also can be used for medium quarry mining conditions.
Main sales territory
Russian-speaking countries such as Russia, Kazakhstan.
Matching auxiliary tools
Various optional attachments including Coal Bucket, Quick Coupling Bucket, Pallet Fork, Log Grabber, Grass Grabber and etc.
Standard arm | ||||
General Purpose Bucket 2.8m³ | Coal Bucket 3.8m³ | Side Dump Bucket 2.3m³ | Grass Grapple 2360mm | Log Grapple 1633m |
- WEICHAI-STEYR engine with a power of 162KW and the max. torque of 890N.M
- UGNX, CAE and other development tools are used for the design of the product to conduct virtual verification. All products have passed the reliability test and adaptability verification.
- Triangle-pump flow-converging hydraulic system offers energy and high efficiency in idle speed. Rotatable hydraulic oil tank favors maintenance for pump and valve. 24°taper seal accompanied by O-ring face seal provides durable leak-free connection.
- Water-proof plug connector improves reliability of the electrical system.
- The unique heat sink structure can enable the machine to work at an ambient temperature of 50℃.
- Side-opening hood maximizes space and access for maintenance.
- Separated by a sleeve, the axial movement of the two bearings is strictly controlled, thus prolongs durability of the hitch by 50%.
Specifications | Units | FL955F-II | |||
Main Specifications | Rated Load | kg | 5000 | ||
Operating Weight(Standard) | kg | 16600 | |||
Bucket Capacity | m3 | 2.8 | |||
Boom Lifting Time | S | 5.57 | |||
Total Cycle Time | S | 10.2 | |||
Max.Traction Force | kN | ≥160 | |||
Max.Breakout Force | kN | ≥175 | |||
Overall Dimension | mm | 7700×2980×3430 | |||
Engine | Model | —— | WEICHAI WD10G220E23 | ||
Type | —— | Six cylinder in line, direct injection, Turbo charged and water cooled | |||
Horsepower | kW/rpm | 162/2200 | |||
Peak Torque/Speed | N·m /rpm | 890// | |||
Bore×Stroke | mm | Φ126/130 | |||
Displacement | L | 9.726 | |||
Fuel consumption in rated working condition | g/ kW·h | 210.5 | |||
Fuel Tank | L | 280 | |||
Drivetrain | Travel Speed | Forward | km/h | 42 | |
Reverse | km/h | 17.5 | |||
Gear Shift | / | F2/R1 | |||
Max.Gradeability | ° | 30 | |||
Steering Angle | ° | 35°for each side | |||
Tire | —— | 23.5-25 | |||
Service brake | —— | single circuit, air over hydraulic ,four-wheel ,caliper disc dry brake | |||
Parking brake | —— | Flexible shaft controlled caliper disc brake | |||
Min. Turning Radius | Center of Outside tire | mm | 5665 | ||
Outside of the bucket | mm | 6850 | |||
Hydraulics | Working System Pressure | Mpa | 18 | ||
Working System Displacement | ml/r | 100 | |||
Steering System Pressure | Mpa | 16 | |||
Steering System Displacement | ml/r | 80 | |||
Oil tank | L | 210 | |||
Performance Data | Wheelbase | mm | 2920 | ||
Wheel Tread | mm | 2250 | |||
Min.Ground Clearance | mm | 480 | |||
Dump Height – fully raised,45°dump | mm | 3135 | |||
Dump Reach – fully raised,45°dump | mm | 1195 |