Mine Mesh Welding Machine
Mine Mesh Welder / Safety Mesh Welder / Wire Welder
Features of the Mine Mesh Welding Machine
1. The line and cross wires are fed from pre-cut wire. The line wires are automatically fed while the cross wires are fed through a hopper. A servo motor pulls the mesh through for continuous production. The feed system adds to the safety mesh welder’s incredible production efficiency.
2. Both the welding electrodes and transformers are equipped with a water-cooling system to prolong the service life of the wire welder.
3. The welding system uses a synchronous power control and separate-control system for simultaneous or singular operation.
4. The welding machine adopts a motor driven, spring weighted design that minimizes operation costs.
5. Welding material can be hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar, etc.
Technological processes of the Mine Mesh Welding Machine Technical Parameters of Mine Mesh Welding Machine | Model | GWCD1200 | GWCD1600 | GWCD2100 | GWCD2500 |
| Quantity of welding spots | 24 | 32 | 40 | 48 |
| Width of mesh | ≤1200 mm | ≤1600 mm | ≤2100 mm | ≤2500 mm |
| Wire diameter | 3-8 mm | 3-8 mm | 3-8 mm | 3-8 mm |
| Length of mesh | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m |
| Transverse wire spacing | ≥50mm | ≥50mm | ≥50mm | ≥50mm |
| Longitudinal wire spacing | 50-200 mm | 50-200 mm | 50-200 mm | 50-200 mm |
| Min. power | 160KVA | 160KVA | 160KVA | 160KVA |
| Best power | 400 KVA | 500 KVA | 630 KVA | 800 KVA |
| Welding speed | 40-60t/min | 40-60t/min | 40-60t/min | 40-60t/min |
| Control system | PLC | PLC | PLC | PLC |
Applications
This machine is mainly used to produce mine timbering mesh and tunnel timbering mesh with great efficiency and strength.
