Mine Mesh Production Line
Mine Safety Mesh Machine / Mesh Manufacturing Line / Mine Mesh Machine
Features of the Mine Mesh Production Line
1. The line and cross wires are fed from coils which can both be straightened, cut and fed directly through the mine mesh machine.
2. Both the welding electrodes and transformers are equipped with a water-cooling system to prolong the service life of the mine safety mesh machine.
3. The welding adopts synchronous power control and separate-control. The transformers of the equipment can operate singularly or in tandem.
4. Main structure of the welding machine adopts a motor drive, spring weighted, minimizing operation costs.
5. Welding material can be hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar, etc.
6. Can be equipped with auxiliary devices for turning over, dropping, and automatic packaging.
Technological processes of the Mine Mesh Production Line Technical Parameters of Mine Mesh Production Line | Model | GWCD2500 (3-8) | GWCD1600 (3-8) |
| Quantity of welding spots | 24 | 16 |
| Width of mesh | ≤2500 mm | ≤1600 mm |
| Wire diameter | 3-8 mm | 3-8 mm |
| Length of mesh | ≥1 m | ≥1 m |
| Transverse wire spacing | ≥50mm | ≥50mm |
| Longitudinal wire spacing | 50-200 mm | 50-200 mm |
| Power | 500 KVA | 400 KVA |
| Welding speed | 80-100t/min | 80-100t/min |
| Control system | PLC | PLC |
Applications
The production line is used for the manufacturing of mine timbering mesh.
