Polyester Conveyor Belt
Request a Quote
Application
The polyester conveyor belt is used in mines, cement plants, steel and iron factories, metallurgy, construction projects, and ports.
Features
This EP conveyor belt has high strength, won’t stretch out or elongate, and is resistant to impact. The conveyor belt is ideal for medium and long-distance transportation.
Fabric | Fabric structure | Fabric type | Fabric thickness (mm/p) | Strength (N/mm) | Cover thickness (mm) | Width (mm) | |||||||
Warp | Weft | 2ply | 3ply | 4ply | 5ply | 6ply | Top cover | Bottom cover | Cut edge | Round edge | |||
Polyester (EP) | Polyester (EP) | Polyamide | EP100 | 0.85 | 200 | 300 | 400 | 500 | 600 | 1.5-8 | 0-4.5 | 400-2200 | 76-2200 |
EP125 | 0.9 | 250 | 375 | 500 | 625 | 750 | |||||||
EP150 | 1 | 300 | 450 | 600 | 750 | 900 | |||||||
EP200 | 1.1 | 400 | 600 | 800 | 1000 | 1200 | |||||||
EP250 | 1.15 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
EP300 | 1.25 | 900 | 1200 | 1500 | 1800 | ||||||||
EP400 | 1.45 | 1600 | 2000 | 2400 | |||||||||
EP500 | 1.55 | 2000 | 2500 | 3000 |
Type | Tensile | Elongation | Abrasion | Change rate of tensile strength and elongation at break after aging | |
mpa≥ | kgf/cm2 | %≥ | ㎜ 3≤ | % | |
Strong cracking operation condition (H) | 24 | 240 | 450 | 120 | -25 - 25 |
Strong abrasion operation codition (H) | 18 | 180 | 400 | 100 | -25 - 25 |
Common operation condition (L ) | 15 | 150 | 350 | 200 | -25 - 25 |
Cover thickness (0.8mm-1.6mm): Tensile strength and elongation at break can be 15% below the data in the above table. |
Fabric type EP | Adhesion | Elongation | |||
Between plies N/MM | Between rubber and fabric N/MM | Longitudinal elongation at break at all thicknesses of belt %≥ | Longitudinal reference tensile rate at all thicknesses of belt %≤ | ||
Cover thickness (0.8-1.5mm) | Cover thickness ≥1.5mm | ||||
Mean value | ≥4.5 | ≥3.2 | ≥3.5 | 10 | 2 |
Lowest data | ≥3.9 | ≥2.4 | ≥2.9 | 10 | 2 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos