Angle Roll, W24S-6
The angle roll of W24S-6 type is a hydraulic three-roll bender manufactured by Juli using Swedish technology. It comes with profile pre-bending function and the all 3 rolls work as the driving rolls. By changing different dies, the 3-roll bending machine can be used to a variety of profiles including square, round, and rectangular tubing as well as all I-section, T-section and C-section bars, etc. Bending dies or tooling can be custom made according to profile specifications.
Features of the Angle Roll
1. The two lower rolls can move in an arc motion around a fixed rotating center. This enables the steel bending machine to pre-bend profiles.
2. All three driven rolls are able to rotate clockwise and anticlockwise.
3. Lateral guide rolls are manually controlled for easy control of profile deformation and for the highest bending accuracy.
4. Hydraulic power unit and the main machine are not a monolithic structure. They are connected by hydraulic pipes.
5. It can be operated in horizontal or vertical position.
6. The metalworking machine is provided with a portable electric control panel, available with emergency switch.
7. Displacement sensor (grating ruler) is equipped on the angle roll for precise digital readouts for lower roll positions.
8. The universal bending machine employs the top tier hydraulic valve blocks from Taiwan Northman, ensuring reliable quality.
9. Wideband motor (5.5kw) ensures high insulation grade and long service life.
| Model | W24S-6 | ||
| Max. bending modulus of section (cm3) | 6 | ||
| Bending speed (m/min) | 5.5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 50×5 | |
| Minimum bending diameter (mm) | 800 | ||
| Minimum cross section (mm) | 20×3 | ||
| Minimum bending diameter (mm) | 400 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 50×5 | |
| Minimum bending diameter (mm) | 800 | ||
| Minimum cross section (mm) | 20×3 | ||
| Minimum bending diameter (mm) | 400 | ||
| Outward bending of channel steel | Channel steel model | 8 | |
| Minimum bending diameter (mm) | 600 | ||
| Inward bending of channel steel | Channel steel model | 8 | |
| Minimum bending radius (mm) | 700 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 100×18 | |
| Minimum bending diameter (mm) | 600 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 50×12 | |
| Minimum bending diameter (mm) | 500 | ||
| Bending of round pipe | Maximum cross section (mm) | 42×4 | |
| Minimum bending diameter (mm) | 500 | ||
| Bending of round bar | Maximum cross section (mm) | 38 | |
| Minimum bending diameter (mm) | 450 | ||
| Bending of square pipe | Maximum cross section (mm) | 45×3 | |
| Minimum bending diameter (mm) | 750 | ||
Related Names
Angle Iron Bending Machine
