Hydraulic Core Drilling Rig, HFY-500
Request a Quote
HFY-500
Introduction
This small HFY-500 hydraulic core drilling rig is a portable drilling rig with a hydraulic drive, hydraulic feed, and hydraulic pullout. This core drill rig runs at a variety of speeds and can adapt to different drilling parameters under different operating conditions. This drilling equipment is used for drilling fixed deposits of diamond or cemented carbide surfaces or tunnels and meets wire line coring requirements. Our land drilling rig is used in construction for geological exploration, hydro-geologic drilling, anchoring, dam grouting, and pile foundation.
Drilling Depth | 500m (JS75 drill stem for wire line coring) |
Tilt Angle of Drill Hole | 45°-90° |
Distribution of Rotating Speed | 0-1000r/min |
Output Torque | 0-2080N • M |
Maximum Pressure Capability | 60KN |
Maximum Pull-up Capability | 125KN |
Hydraulic Winch I for Wire Line Coring | |
Tension | 1500kg (one-tier) 1470kg (two-tier) 1325kg (three-tier) 1025kg (ten-tier) |
Linear Velocity | 34m /min, 36m/min, 39m/min, 50m/min |
Rope Capacity | 49, 99, 151, 500 |
Motor Displacement | 115ml/r |
Lifting Pressure | 18MPa |
Arrester Brake Opening Pressure | 1.5-3MPa |
Wire Cable Diameters | Φ6mm |
Rope Capacity | 500m |
Hydraulic Winch II ( Jiangyin Zhongxin )- for strong drill bit hoisting | |
Wire Cable Rated Tension (bottom layer) | 68KN |
Working Velocity (bottom layer) | 7.5mc/min |
Rope Capacity | 45m |
Wire Cable Diameters | Φ14mm |
Pressure | 14MPa |
System Dynamic | CZ480Q × 3 diesels |
Single Power of Diesels | 26kw/2500r/min |
Routes of the Feeding Oil Cylinder | 1800mm |
Weight of the Driller | Total 180kg |
Working Pressure of the Driller | 20MPa |
Slurry Pump | YZ4-150 direct driving slurry pump |
Output Flow Rate | 0-138L/min |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos