Screw Extrusion Granulator
The SE series screw extrusion granulator comes in both a single-screw and double-screw type. These granulating machines are designed for wet material or materials with low melting points after a kneading and mixing process. The screw drives the material to push it through the mold plate. The diameter of the end grain can be chosen and controlled by changing the openings in the mold plate. This granulator is suitable for granulating rubber materials, food additives, plastic materials, agrochemicals, dyes and other daily chemicals.
Features
1. The raw powder materials are kept in a wet state to minimize dust output by up to 90%.
2. Granulation using the screw extrusion granulator can help prevent curdling and clumping in raw materials.
3. In addition to the uniform and high quality granulation output, the machine also performs effective mixing.
Main Technical parameters
Model SelectionSET Double-screw extruding pelleter | SES Single-screw extruding pelleter | ||||
Type | Screw dia.(mm) | Driving powder (kw) | Type | Screw dia.(mm) | Driving powder (kw) |
SET-60 | 60 | 3.7 | SES-100 | 100 | 7.5 |
SET Double-screw extruding pelleter | SES Single-screw extruding pelleter | ||||
Type | Screw dia.(mm) | Driving powder (kw) | Type | Screw dia.(mm) | Driving powder (kw) |
SET-100 | 100 | 7.5 | SES-120 | 120 | 15 |
SET Double-screw extruding pelleter | SES Single-screw extruding pelleter | ||||
Type | Screw dia.(mm) | Driving powder (kw) | Type | Screw dia.(mm) | Driving powder (kw) |
SET-140 | 140 | 15 | SES-160 | 160 | 22 |
SET Double-screw extruding pelleter | SES Single-screw extruding pelleter | ||||
Type | Screw dia.(mm) | Driving powder (kw) | Type | Screw dia.(mm) | Driving powder (kw) |
SET-180 | 180 | 30 | SES-180 | 180 | 30 |