Fiber Jumpers
Fiber Optic Patch Cords and Consumables
Fiber jumpers are for installing plug connectors at both ends of a cable to realize live connections between optical paths. We offer single mode and multi-mode jumpers for silica fibers, including FC fiber jumpers, SC fiber jumpers, ST fiber jumpers, LC fiber jumpers, MTRJ fiber jumpers, MPO fiber jumpers, MU fiber jumpers, SMA fiber jumpers, FDDI fiber jumpers, E2000 fiber jumpers, DIN fiber jumpers, and D4 fiber jumpers. Fiber optic patch cords and consumables are widely used in communications rooms, FTTH, local area networks, fiber optic sensors, fiber optic connection & transmission equipment, cable television and more.
Technical parameters:| Item | Test Conditions | Single mode | Multimode | ||
| Optical properties | insert ion Loss | UPC | SM:1310nm/1550nm MM:850nm/1300nm | ≤0.2dB | ≤0.3dB |
| APC | 1310nm/1550nm | ≤0.3dB | |||
| Return Loss | UPC | SM:1310nm/1550nm MM:850nm/1300nm | ≥55 dB | ≥35 dB | |
| APC | 1310nm/1550nm | ≥65 dB | |||
| Mechanical properties (additional loss) | Impact test | height 1.8, 8 times | <0.1 dB | <0.1 dB | |
| Vibration test | 10-60Hz,1mm full amptitude | <0.1 dB | <0.1 dB | ||
| Plugging service life | More then 1,000 times | <0.1 dB | <0.1 dB | ||
| Tensile strength | >100N | <0.1 dB | <0.1 dB | ||
| Environmental properties (additional loss) | High and low temperature cycling test | －25℃ ～ 70℃ , 2 cycles | <0.2 dB | <0.2 dB | |
| High temperature test | 80℃ , 2 hrs | <0.2 dB | <0.2 dB | ||
| Low temperature test | -40℃ , 2 hrs | <0.2 dB | <0.2 dB | ||
| Damp heat test | 40℃ , 90-95%RH, 2 hrs | <0.2 dB | <0.2 dB | ||
1. Types per connector: FC, ST, SC, LC, MU, MPO, E2000, MTRJ, and SMA; types per contacting method of end face: PC, UPC, and APC.
2. Outer diameter of Ф0.9mm, Ф2mm, Ф3mm, number of fiber conductors: single, dual, 4, 6, 8, 12, or as specified by customers.
3. Designations: G652B, G652D, G655, G657A1, G657A2, 50 / 125, 62.5 / 125, OM3 (50 / 125-150), OM4 (50 / 125-300).
4. Types per connector color: blue (commonly used in single mode PC, UPC connectors), beige, gray (commonly used in multimode connectors), green (APC connectors), aqua blue (OM3); the tails can be in: gray, blue, green, white, red, black, and cyan.
5. Cable length: specified by customers.
