Automated Soldering Robot, C Type
Introduction
DH-300C is one high precision automated soldering robot, combined with upgraded temperature controlling system, high-end soldering iron tip & newly-designed wire feeder tube. The robot has the driving system of servo motor screw rod, with higher accuracy, faster moving speed & better consistency in positioning & soldering.
Features of the C-Type automated soldering robot:
Servo motor and screw rod, with high-end iron head.
Performance:
1. Upgraded temperature control system, with the optimization of real-time detection, compensation and feedback. Temperature stability: 2ºC (still position, no load)
2. Upgraded tin wire transmitting system to reduce the blocking of tin during soldering operation.
Model | |
Power of temperature controlling system | 90 W |
Input voltage | 220V AC |
Temperature controlling range | 200~480ºC |
Specification of applicable tin wire model | Friction wheel: 0.3~1.5mm; tin-break wheel: 0.3~1.5mm |
Axis NO. | 3 axis(X Y Z) |
Repetition positioning accuracy | ±0.01 mm |
Motion range | X axis:300mm |
Y axis:300mm | |
Z axis:100mm | |
Resolution rate | X axis:0.004mm |
Y axis:0.004mm | |
Z axis:0.002mm | |
Overall dimension | L*W*H: 700mm*500mm*650mm |
Typical Applications:
Used in small pad soldering, accurate soldering; such as CCM, VCM, and other products.
Attachments
DH-300C automated soldering robot
DH-TC-90/300 soldering station
High-end soldering iron tip
Tin solder wire