Hot Melt Adhesive Jet Valve (PZT-JET Type Controller)
Introduction
PZT-JET5030 is one type of non-contact piezoelectric jet valve (hot-melt adhesive), specially designed & developed for reactive type PUR hot-melt adhesive; it is widely used for electronics core filling, mobile phone frame gluing, TP screen jointing, mobile phone speaker & receiver assembling, etc. PZT-JET5030 valve is used for dispensing point diameter or dispensing line of above 0.2mm.
Performance:
1. The hot melt adhesive jet valve is designed for non-contact jet dispensing - suitable for reaction type PUR hot melt adhesives.
2. The latest piezoelectric driving device offers high hot melt adhesive dispensing speed compared to similar products.
3. Modular design for easy parts replacement.
4. Continuous operating frequency up to 500Hz.
5. High accuracy of injection volume to 0.1nl, and the dispensing glue point uniformity to 2%.
6. Less operating space needed for injection.
7. Temperature of hot melt adhesive and injection can be controlled separately.
8. High matching adaptability for any movement platform.
PZT-JET5030 piezoelectric type melt-adhesive injection valve | |
Performance: | |
Thimble assembly | High wear-resistant material |
Nozzle assembly | High wear-resistant material |
Max heating temperature | 180 ℃ |
Max driving volt | 100V |
Minimum valve opening time | 0.8ms |
Minimum valve closing time | 0.8ms |
Max dispensing frequency | 500Hz |
Minimum wire width | 0.3mm |
Attachments
Standard:
PZT-JET5030 piezoelectric jet valve
PZT-JET5000B control system
Luer taper
HMA heating control system
Optional:
Hook type joint
Venting valve
Cartridge retainer