Two-Part Solid Silicone Rubber for Insulators/Addition-Curing Solid Silicone Rubber (Two-Part) Manufacturer

Two-Part Solid Silicone Rubber for Insulators/Addition-Curing Solid Silicone Rubber (Two-Part)

Request a Quote

View All: http://srsilicone.com/1-1-3-two-part-solid-silicone-rubber/index.html

Model No.
SSR1501-40MA/MB(Molding),SSR1501-50MA/MB(Molding),SSR1566-40EA/EB(Extrusion)

Product Description
The SSR1501 solid silicone rubber is a platinum catalyzed two-component solid silicone rubber for extrusion or molding process. Our two-part solid silicone rubber features good aging resistance, high tear resistance, superior dielectric property, high tensile stretch, etc. It is non-reactive, stable and resistant to extreme environments and temperatures from -60℃ to 230℃ while still maintaining its useful properties. Due to these properties, our solid silicone rubber is used to cold shrinkage termination, insulation tube, joint and breakout, etc.

Storage
Keep sealed and store in cool, dry and dark place. It has a shelf life of 12 months.

Usage
Use a static mixer to mix the two components, A and B with a ratio of 1:1. Feed the mixture directly into an injection molding machine. Note: the mixture has an effective operating time of 48 hours.

Packing
Our two-part solid silicone rubber is packed in 20kg carton.

Typical Properties

Physical properties	Test method	Unit	SSR1501-40MA/MB	SSR1501-50MA/MB	SSR1566-40EA/EB
Appearance (Color)			Translucent	Translucent	Translucent
SHORE Hardness	D2240	A	37 ~ 43	47 ~ 53	37 ~ 43
Tensile strength	D412	MPa	＞ 9	＞ 9.5	＞ 9
Elongation at Break	D412	%	＞ 850	＞ 850	＞ 850
Tear strength	D624B	KN/m	＞ 35	＞ 40	＞ 38
Tension Set: Keep 300% extension for 15 hrs at 120 ℃	D412 DIE C	%	＜ 8.0	＜ 8.0	＜ 8.0
Volume resistivity	IEC60093	Ω.cm	1.0×10¹⁵	1.0×10¹⁵	1.0×10¹⁵
Dielectric strength	IEC60243	KV/mm	26	26	26
Shaping mode			Molding	Molding	Extrusion

Note:
Molding condition: High pressure curing for 10 minutes at 170℃
GB stands for Chinese national standard
The above technical properties are for reference only. For detailed molding
conditions, please contact us directly.