Non-Magnetic Heating Cable
Teflon Heating Wires without Magnetism
Model: SH-2FP
Rated temperature: 150℃
Rated voltage: 300V
Structure
Conductor: single conductor alloy or resistance wires twisted into a spiral on fiberglass
Shield: bare or tinned copper wire,etc.
Insulation/jacket: FEP, PFA
Product Certificate:
UL21667
Usage:
Our non-magnetic heating cable is used for its various properties and is often installed in electric massage chairs, medical equipment and many other pieces of equipment with heating sources.
| item | performance index | instruction | |
| insulation Teflon | tensile strength | ≥ 17.2Mpa | UL1581 |
| elongation | ≥ 150% | ||
| minimum average thickness | ≥ 0.25mm | ||
| finished wire | hot deformation test | ≤ 50% | UL standard |
| spark test | no spark-over | 4.0KV/0.15sec | |
| conductor resistance | Nominal value 10%/-5% | ||
| resistance scope | 1--10000 ohm/m | ||
| O.D. of finished product | 3.0 /-0.15mm | other O.D. could be possible | |
| length per coil | 100---500m | ||
Standard color is red, however, other colors are possible.
PVC Heating Wires without Magnetism
Model: SH-PVC2
Rated temperature: 90℃
Rated voltage: 300V
Structure:
Conductor: single conductor alloy or resistance wires twisted into a spiral on fiberglass, nylon, polyester fibers
Shield: bare or tinned copper wire, etc.
Insulation/jacket: PVC
Certificate:
UL21789
| items | performance index | instructure | |
| insulation PVC | tensile strength | ≥ 1.05kg/mmsq | UL1581 |
| elongation | ≥ 150% | ||
| minimum average thickness | ≥ 0.50mm | ||
| finished wire | hot deformation test | ≤ 50% | UL standard |
| spark test | no spark-over | 6.0KV/0.15sec; | |
| conductor resistance | standard value 10%/-5% | ||
| resistance scope | 1--10000 ohm/m | ||
| O.D. | 5.3*8mm /-0.15mm | other O.D. could be possible | |
| length per coil | 100---200m | ||
Black is the standard color, however, other colors are available.
