Roof and Gutter De-Icing Cable
Usage
The roof and gutter de-icing cable is designed to prevent ice build-up on roofs, gutters and downspouts. When properly installed, these heating cables will create a path for snow to melt and drain from the roof to the ground.
Marketing Promotion:
These roof and gutter heaters are highly efficient and cost effective. They automatically adjust to the appropriate heat output as ambient conditions vary.
Note:
Do not reset breaker/replace fuse until conditions allow you to unplug and inspect the entire cable for damage.
Dispose of cable if damaged or deteriorated (cuts, brittleness, charring, cracking, discolored surfaces or bare wire). Even if you cannot see damage on the cable. assume it is damaged if you cannot find another cause for tripped breaker or blown fuse.
| Catalog Number | Length (m) | Watt (W) | Current (AMP) |
| SHRD -10 | 10 | 160 | 0.7 |
| SHRD -15 | 15 | 240 | 1.0 |
| SHRD -20 | 20 | 320 | 1.4 |
| SHRD -25 | 25 | 400 | 1.7 |
| SHRD -30 | 30 | 480 | 2.1 |
| SHRD -40 | 40 | 640 | 2.8 |
| SHRD -50 | 50 | 800 | 3.5 |
| SHRD -60 | 60 | 960 | 4.2 |
| SHRD -80 | 80 | 1280 | 5.6 |
| SHRD -100 | 100 | 1600 | 7.0 |
| type | length | Watt (W) | Current (AMP) | |
| Feet | meter | |||
| SHRD-20 | 20 | 6.3 | 100 | 0.8 |
| SHRD-30 | 30 | 9.1 | 150 | 1.3 |
| SHRD-60 | 60 | 18.3 | 300 | 2.5 |
| SHRD -80 | 80 | 24.4 | 400 | 3.3 |
| SHRD -100 | 100 | 30.5 | 500 | 4.2 |
| SHRD-120 | 120 | 36.5 | 600 | 5.0 |
| SHRD -160 | 160 | 48.8 | 800 | 6.7 |
| SHRD -200 | 200 | 61 | 1000 | 8.3 |
| SHRD -240 | 240 | 73.2 | 1200 | 10.0 |
