Magnifier

The magnifier is mainly used in the accurate quality detection of the surface printing on aluminum tubes and aluminum cans. It also can be used for accurately detecting the number of lines and the gage of cloth of many kinds of textiles including the cotton, wool, silk, hemp and blended fabrics. Besides, the magnifier can be used for observing the circuit board, textile, seal, printed matter, sculpture, circuit board and so on.

Model: 10X or 50X

Wall Thickness Micrometer

Principle of Measurement
The fixed gauge button of wall thickness micrometer gauge is sphere. It is used to measure pipe thickness.

It is the measuring appliance which uses principle of screw pair and reads the distance between spherical measuring surface and flat measuring surface to measure pipe thickness.

• Painting frame, hard alloy measuring surface.
• Optional position reset, MM/INCH switch.
• It can preset tolerance and judge whether the workpiece dimension is accord with the tolerance or not.

Parameters
Standard 0-25MM; Precision 0.01MM

Digital Vernier Caliper

The digital vernier caliper is a length measuring tool which displays by number. It can measure the length, inner and outer diameter, depth, step and so on. The vernier caliper adopts raster, capacitive grate and some other measuring systems.

It is mainly used for measuring the thickness of the leather, rubber, paper, fabric and various metal sheets and plastic sheets.

• The caliper adopts stainless steel or high quality carbon steel as raw materials.
• It has 4 functions that it can measure inner and outer diameter, depth and step.
• The digital vernier caliper has efficient measuring and intuitive and clear readings.
• The common resolution of the digital vernier caliper is 0.01mm and the allowable error is ±0.03mm.

Measuring Range: 0-150 (mm)

Aerosol Can Contact Height Measurer

The aerosol can contact height measurer controls the size of the can mouth in the producing process of the aerosol can. It gives effective control of improving the matching accuracy of the can mouth and the aerosol valve and the prevention of leakage.

Conductor

The conductor is mainly used for detecting whether the spraying of the inner wall of the aluminum tube is consequent or not. The aluminum tube which can be detected has a diameter ranging from 11mm to 35mm and a tube length ranging from 45mm to 200mm. The aluminum can which can be detected has a diameter ranging from 22mm to 66mm and a can length ranging from 55mm to 260mm.

The conductor is good-looking and convenient to carry. It displays by number and has stable performance. The operation of it is very easy. Its reading is accurate and only and the accuracy can achieve 0.1mA. Using this equipment can improve the quality control level of the process of internal spray. It is essential equipment for aluminum tubes manufacturers to improve their management level and product quality.