Screen size: 31 inch
Resolution: 4096×2160
Signal: 3G-SDI×4(60P)
Color gamut: DCI-P3
Color depth: 10bit
This TL-D3100K filmmaking 31 inch LCD monitor is a film level 4K LCD monitor which is the high-end display equipment built by RUIGE. It is applicable to the pro-phase shooting and post color-correcting of film, TV play and the high-end advertisement production.

1. The built-in 3D LUT calibration system and 23 professional functions of TL-D3100K make you satisfied for your needs of color and functions.

2. TL-D3100K adopts the ultra high-grade panel of which the original color gamut can completely comply with the DCI-P3 digital film color standard. It features 10 bits color depth. The monitor can also produce 1.07g colors.

3. Each monitor is calibrated based on the software Calman authorized by the US company SpectraCal.

5. Signal format: 3G/HD/SD-SDI; 4×BNC; 4×HDMI

TL-B2150HD desktop 21.5 inch broadcast monitor, LCD monitor has the following functions:
Function setting button, 3D LUT loading, luminance waveform, RGB waveform, vector, audio meter, time code, focus assistance, ELP (GPS in video), false color, zebra, safety marker, marker scale, anamorphic de-squeeze for distortion lens, blue only, mono, aspect ratio, over scan, pixel-to-pixel (PTP), dynamic UMD, H/V DELAY, battery with display meter, GPI control, safety lock

B/P/D Series Monitor adopts built-in 3D-LUT Color Management System in accordance with unified industry standards. It also uses professional testing equipment to take systematic and accurate calibration for monitors to ensure that the display indicator of monitor can meet the tolerance range of color space standard. Therefore, it ensures that each monitor has the accurate color restoration and the color of same style monitors is consistent to the maximum extent.

The TL-D3100K screen adopts two kinds of luminance waveform of IRE and voltage luminance waveform. The basic function of these two measuring methods is that they can monitoring the range of luminance change of the video signal at real time.

16 channels of digital audio signal can be embedded in the SDI audio signal. Normally, just displaying 8 channels can satisfy basic requirements. The Volume unit SDI (VU&PPM) is used for measuring audio levels and calibration. This is helpful for making sure that audio levels are within technical requirements and specifications. The data can be defined by customers according to requirements. It can be displayed vertically or horizontally.

① Warning area ② Early-warning area ③ Safety area ④ Indicator mark ⑤ Channel value

The safety marker of Ruige can avoid image cutoffs caused by over scan during video play. The display safety issue is caused by over scan during video signal display on the video receiving and re-playing device.

① Totally black ② Fully transparent ③ Semi transparent

Mono (black and white) is usually used for focus. Human Eyes are more sensitive to the luminance signal, therefore many viewfinders and small monitors have this function.

Usage: this function can be used for evaluation of exposure. False color can show the level of brightness (Y). It is a method enhancing image display. Warm color indicates higher exposure and cool color indicates low exposure. The color change from warm color to cool color is red, yellow, green, blue. So the image with higher brightness shows dark red while image with lower brightness shows dark blue. So false color is a direct method which has the similar function of luminance waveform, showing the luminance distribution of the image.