Resin Wheel for Grinding Light Fixture

Resin Wheel for Grinding Light Fixture
Resin Wheel for Grinding Light Fixture
Resin Wheel for Grinding Light Fixture
Resin Wheel for Grinding Light Fixture
Request a Quote

This product has been discontinued and removed from our shelves.

This resin wheel is available as either a diamond type or CBN type, and is capable of polishing workpieces into a mirror finish. It is used for light guide plates, LED bulb shells, and other photic and electrical products.

Features
  • The resin wheel has an excellent polishing effect, ensuring the finished workpiece has a smooth surface.
  • The high sharpness will not block the machine during the grinding process.
  • A high efficiency and slow wearing will not impact the cost effectiveness.
  • With a self-sharpening performance, it features a low friction degree when grinding workpieces, ensuring low heat generated to reduce thermal damage to the workpieces.
  • The grinding wheel is featured with elastic-bonded abrasive to adjust to the workpiece surface, which can be used for fine grinding, polishing and other processes.
1A1 Grinding wheel
Outer diameter (mm) Overall thickness (mm) Arbor hole diameter (mm) Abrasive width (mm)
12 8-12 6 2/3
14 8-14
15
16 8-16 10
18
20
23 12-20
25 2-20 5/6/8/10/12 2/2.5/3/4
30 5/6/8/10/12/13
35 10/12/12.7/16 2/2.5/3/4/5
40 0.2-20 8/10/12/12.7/16
45
50
60 8/10/12/12.7/16/19.05/20/22.23
75 0.4-30 10/16/19.05/20/22.23/25.4 3/4/5
80
100 0.4-35 20/22.23/25.4/31.75/32 3-6
115 2-20 20/22.23/25.4/31.75/32
125 0.8-35 4/5/6/8/10
150 1-35 25.4/31.75/32/40
175 3-35 31.75/32/40 5/6/8/10/16
180 10-40 31.75/32/40/50.8/75/76.2
200 1-40 5/6/8/10/16/20
250 10-60 50.8/75/76.2/101.6/127
300 3-60 75/76.2/101.6/127/203 5/6/8/10/16/20/25
350 12-50 127/203
400 3.5-50
450 12-60 203/304.8/305 5/6/8/10/12/15
500
600
700
750
800 18-50 132/304.8/305
850
900
Note: other specifications can be customized upon request!
14A1 Grinding wheel
Outer diameter (mm) Overall thickness (mm) Arbor hole diameter (mm) Wheel core dimension (mm) Abrasive thickness (mm) Abrasive width (mm)
75 5-10 19.05/*20 40-50 0.8-5 2-5
100 5-15 19.05/20/31.75/32 50-80 1-8 3-6
125 90-110
150 10-15 31.75/32 100-130 1-10
175 12-20 120-140
200 12-30 31.75/32/75 130-160 2-10 4/5/6/8/10
250 150-200 5-10
300 15-40 127/203 200-250 6-15
350 250-300
400 20-50 300-350 6-20 5/6/8/10/12/15
500 203/305 350-400 10-30
600 20-60 305 400-500
700 450-600
Note: other specifications can be customized upon request!
Related products
Send Message
Other Products
Inquiry
Inquiry