Percussion Drilling Rig
Request a Quote
The HF-6A /HF-3C percussion drilling rig is one of the most important drilling equipment for constructing piling foundation and drilling boreholes. The electric motor, drive motor, hoist, and mast are all stored on the trailer, and a crank mechanism changes the power to an alternating motion so the hammer moves up and down. Adapting to different terrains, even gravelly and rocky areas, the land drilling rig has excellent pile forming capabilities as the hammer easily breaks up soil, sand, gravel, and rock, and then uses a slag tube or mud pump to remove the slag from the hole. Because of its high efficiency, the HF-6A /HF-3C hammer drill rig is widely popular across the market.
HF-3C
HF-6A| Drilling Rig Model | ||
| Dimensions (M) | 9.30*2.50*3.10 | 4.6*2.2*8 |
| Transport dimensions (M) | 9.30*2.28*2.80 | 4.6*2.2*2.7 |
| Weight (kg) | 9500 | 8500 |
| Drilling diameter (mm) | 300-1800 | 400-600 |
| Drilling depth (M) | 300 (when diameter is600mm) | 100-2500 |
| Max. weight of drill bit (kg) | 5000 | 3000 |
| Impact stroke (mm) | Max. 850 , Min. 700 | 140 |
| Rate of impact (time/min) | 38-42 | 35-42 |
| Electric motor | Model YL280M2-6,55KW 980R/Min | 40KW |
| Height of mast (M) | Single bar 8.5-9.5m; Double bar 12.5m | 8-12 |
| Load capacity of mast (kg) | 50000 | 15000 |
Related products
.jpg "Core Drilling Rig (Hydraulic)")
.jpg "Directional Drill / HDD Rig (Hydraulic)")
Send Message
Other Products
Most Recent
More
Other Products
Videos
