Grounding Terminal Block
10000961

Grounding Terminal Block

Ground 35 and 32mm DIN Rail
Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail.
Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags.

Parameters
ITEM NO. SKJ-1.5JD SKJ-2.5JD SKJ-4JD SKJ-6JD SKJ-10JD
Order No. 01090 01012 01013 01014 01015
Dimensions
Width x Length x Height (mm) 42.5/4.2
/40.5
42.5/5.2
/46
42.5/6.2
/46
42.5/8.2
/46
42.5/10.2
/46
Nominal screw diameter (mm) M2 M3 M3 M4 M4
Torque (Nm) 0.22-0.25 0.5-0.7 0.5-0.7 1.5-1.8 1.5-1.8
Stripping Length (mm) 7 8 9 10 10
Parameter
Voltage Rating (V)
Current Rating (A)
ITEM NO. SKJ-1.5JD SKJ-2.5JD SKJ-4JD SKJ-6JD SKJ-10JD
Wire section (mm2) 1.5 2.5 4 6 10
Wire Range
Rigidity wire range (mm2) 0.14
-1.5
0.2-4 0.2-6 0.2-10 0.5-16
Soft wire range (mm2) 0.14-1.5 0.2-2.5 0.2-4 0.2-6 0.5-10
DIN Rails Type Order
No.
Type Order
No.
Type Order
No.
Type Order
No.
Type Order
No.

Mountable rail type
15L 02006 15L 02006 15L 02006 15L 02006 15L 02006
G32- G32- G32- G32- G32-
18/15 02007 18/15 02007 18/15 02007 18/15 02007 18/15 02007
TH35
-7.5
02005 TH35-7.5 02005 TH35-7.5 02005 TH35-7.5 02005 TH35-7.5 02005
Mark Tag

Blank
SZB4
-10
01077 SZB5 01064 SZB6 01064 SZB8 01064 SZB10-10 01067
Pre-printed 10 no. Horz. SZB4
(Horz.)
SZB5
(Horz.)
SZB6
(Horz.)
SZB8
(Horz.)
SZB10
(Horz.)
Pre-printed 10 no.Vert. SZB4
(Vert.)
SZB5
(Vert.)
SZB6
(Vert.)
SZB8
(Vert.)
SZB10
(Vert.)
ITEM NO. SKJ-16JD SKJ-35JD SKJ-2.5XJD SKJ-4/2 x 2JD SKJ-4/1-2JD
Order No. 01016 01017 01091 01093 01104
Dimensions
Width x Length x Height (mm) 42.5/12.2/53 50.2/15.2/61 42.5/6.2/40.5 56.5/6.2/46.4 50.5/6.2/47
Nominal screw diameter (mm) M4 M6 M3 M3 M3
Torque (Nm) 1.5-1.8 3.2-3.7 0.5-0.7 0.5-0.8 0.6-0.8
Stripping Length (mm) 11 15 7 8 8
Parameter
Voltage Rating (V)
Current Rating (A)
Wire section (mm2) 16 35 2.5 4 4
Wire Range
Rigidity wire range (mm2) 2.5-25 0.75-50 0.2-4 1.5-4 0.2-4
Soft wire range (mm2) 4-16 0.75-35 0.2-2.5 1.5-4 0.2-4
DIN Rails Type Order No. Type Order No. Type Order No. Type Order No. Type

Mountable rail type
15L 02006 15L 02006 15L 02006 15L 02006 15L
G32- G32- G32- G32- G32-
18/15 02007 18/15 02007 18/15 02007 18/15 02007 18/15
TH35-7.5 02005 TH35-7.5 02005 TH35-7.5 02005 TH35-7.5 02005 TH35-7.5
Mark Tag

Blank
|Go Kart Cable Clamp|Kart Sprocket|Under Water Control Cabinet|High Quality Earthing Copper Bar|2rca Metal Rca Cable|Car Cigarette Lighter Plug To Socket|Pin Connecter|Car Speakers Wire Harness|Signal Light|Expansion Nut|Car Cigarette Lighter Plug To Socket|Racing Kart Sprocket|
Feedback Form
Other Products
    1. Fuse Terminal Block
    2. Fuse Terminal Block Fuse Blocks Certain electrical and control systems require protection by fuses. SKJ-10RD and 10RD/X have a specially designed space for cartridge type glass fuse and accept Ø5 x 20 or Ø5 x 25 mm fuses. The fuse can be engaged or disengaged by the movement of the carrier. Parameters ITEM NO. SKJ-2.5RD SKJ-2.5RD/X
    1. Double Level Type Terminal Block
    2. Double Level Type Terminal Block Feed-through Double Level 35 or 32mm DIN Rail SMS double level terminals are the answer to high wiring density problems posed by certain unavoidable wiring arrangements. Double level terminals have the following advantages: 1. Double wiring density available without extension of mounting rails. 2.
Copyright © 2008 - ETW International. All rights reserved.Legal Information