UserName: PassWord:
My account
My account
Contact Us

Rolling Door Detector,China Rolling Door Detector

ETW International,ETW Product List
R
Rolling
24 result(s) for Rolling Door Detector  
    2. DC Motor (Metal Rolling Mill's Drive)
    3. DC Motor (Metal Rolling Mill\'s Drive)DC Motor (Reversing Mill\'s Drive)Description of DC Motor Z315-Z710:This series DC motors are specially designed for metal rolling mills, but the reversing mill is a exception. The excellent electromagnetism load can reach the best for the optimization of the rotor diameter while reducing the ratio of the inertia and the torque. This design make the DC motors quick response to speed and load changes.Configuration and Features of DC Motor Z315-Z710:1
    2. Rolling Drum Shot Blasting Machine
    3. Rolling Drum Shot Blasting Machine Our shot blasting machine is suitable for surface rust removal of work pieces in medium or small quantity batch production with many varieties. Put the work pieces into the barrel and blasting it in side way. The high-speed impeller throws abrasive to continuous tumbling castings or forgings in barrel, then to remove greensand or scales on the surface. It cleans evenly and its productivity is high, so our shot blasting machine is suitable for cleaning the smal
    2. Rolling Shot Blast Machine
    3. Rolling Shot Blast MachineThe rolling shot blast machine uses the high-speed impellerto throw the shot into barrel to remove the residual sand or scales on thesurface of the continuous tumbling castings or forgings. The machine featureseven cleaning and high efficiency. It is used for surface rust removal ofmedium or small sized work pieces in batch production. With a single dustcollection device, the rolling shot blast machine can be installed anywherewithout the limitation of a plant ventilati
    2. Rolling Door Machine
    3. RollingDoor MachineModel Number: 60-70 Thickness: 2.5mmEffective Width: 60mmFeeding Width: 250mmRoll Station: 20http://www.rolling-machine.com/4-14-rolling-door-machine.htmlFeaturesShutterdoor machines can produce steel shutter door slats in galvanized sheet,pre-painted sheet or stainless steel sheet. Steel shutter door slats are usedas the doors for work plants and shops because ofdurable use, space saving, low cost and low noise.Thecomplete rolling door machine line includes decoiler,main mac
    2. Keel Sheet Rolling Machine
    3. KeelSheet Rolling MachineModel Number: 40-83Thickness: 0.4-0.8mmEffective Width: 83mmFeeding Width: 160mmRoll Stations: 16http://www.rolling-machine.com/6-7-keel-sheet-rolling.htmlFeaturesThe keel machine is the wholename of stud, track machine, U shape machine, L shape machine and small sizemachines. Keel machines make various sizes and thicknesses of steel stud,track, U shape, L shape products. These products have many advantages, such aslow cost, easy installation, short building period,re-c
    2. Rolling Shutter Slats Roll Forming Machine
    3. Rolling Shutter Slats Roll Forming MachineDescription of PU Insulated Rolling Shutter Slats Roll Forming Machine:This roll forming machine can produce rolling shutter slats with polyurethanefoam online injected. Its PLC control system such as PLC, touch screen,inverter and encoder are imported from Japan.Main TechnicalData of PU Insulated Rolling Shutter Slats Roll Forming Machine:- Steps of rollers: 32 stations- Length of main machine: 24 meter- Diameter of roller shaft: 40mm- Material of rolle
    2. Radiator Fin Plate Rolling and Welding Machine
    3. Radiator Fin Plate Rolling and Welding MachineRadiator Fin Plate Welding MachineOur radiator fin plate rolling machine is designedon the basis of technology from Germany GEORG. Fin plates of different widths(520mm, 480mm, 320 or 310 mm) can be produced by it. Size changing on the rollforming machine is realized by hydraulic drive, easy and convenient. The radiator fin plate rolling line is mainly composed of hydraulic expansion decoiler, roll forming machine, transmitting table,hydraulic press,
    2. Plate Rolling Machine
    3. PlateRolling MachineMechanical 3-Roller Symmetrical Plate Rolling MachineCharacteristics 1. Our mechanical 3-roller symmetrical plate rolling machine is designed withthree roller symmetrical structure. 2. With the transmission of lead screw, nut and worm, the upper roller movesvertically in the center between the two lower rollers. 3. The two lower rollers rotate and can provide torque for plate materialsthrough the engagement of the output gear of speed reducer and the gear of thelower rollers.
    2. Rolling Rubber Fender
    3. Rolling Rubber FenderOur rolling rubber fender counteracts the collision forcegenerated during berthingby taking advantage of the rotation of the rollers and thecompression deformation of the rubber material. When the ship is berthing ormoving, it rotates along with the movement of the ship, thus ensure safety.This rubber fender is applicable for docks, shipyards, roll-on-roll-off ships, and occasionswhere there are limitations on shipsmoving direction and berthing speed. Characteristics 1. The
    2. Hydraulic and Electric Rolling Machine
    3. Hydraulic and Electric Rolling MachineFeatures1. All three axes of the hydraulic and electric rolling machine are hydraulicallydriven.2. The roller bearing can have synchronous or asynchronous operation andcan reel or cone materials.3. The hydraulic and electric rolling machine has a digital readoutdevice to observe the up and down motion of the rear roller\'s hydraulicpressure.4. All the rollers are made of alloy steel, whose hardness can reachHRC55.5. The hydraulic and electric rolling ma
    2. Electric Rolling Machine
    3. ElectricRolling MachineFeatures1. The maximum processingcapacity of the heavy electric rolling machine can reach 4.5 MM.2.The electric rolling machine not only reels but also can cone the materials.3.It can roll the round bar steels whose specifications are 6,8, 10 and so on.4.The electric rolling machine features a roller quenching that is more durable.5.The upper axis is fixed. The electricrolling machine runs through adjusting the lower and rear axes.6.The locking structure of upper roller
Product List
ETW International,ETW Product List
R
Rolling

United States | Argentina | Brazil | China | France | Germany | Japan | Korea | Russia | Spain | Switzerland | Thailand | UAE | United Kingdom | Vietnam | Poland | Italy | Morocco | Malaysia | Portugal | India

Copyright © 2008 - ETW International. All rights reserved.