Sheet Metal Fiber Laser Cutting Machine with Full Cover Protection
High powered sheet metal fiber laser cutting machine has stable optical path system and packaged fiber laser with stable working performance. The fiber laser features the working life as high as 100000 hours. This kind of machine can be used for cutting 0.5 - 25 mm carbon steel plate, 0.5 – 16 mm stainless steel plate, 0.5 – 10 mm brass plate, and other metal plates like alloy steel, silicon steel, aluminum alloy
Features- Equipped with actuating motor and high precision gear and rack, this kind of fiber laser cutting machine has the high cutting precision of ±0.05mm
- This kind of fiber laser cutting machine has double worktable. It only takes 15 seconds for loading and unloading with high efficiency. The drive system is very reliable by using the variable frequency motor.
- The fiber laser cutting machine is featured with full cover protection of operators from laser radiation.
- Equipped with surrounded dust collecting system which can connect with external filtration equipment for dedusting.
- Real-time monitoring system makes it possible for the operators to follow the processing schedule.
- The computer controlled cutting system can conduct automatic edge detection.
Parts
The fiber laser has the working life of over 100000 hours, which can change the laser beam focus automatically by setting the parameters to cut plates with different thickness.
Laser head is equipped with double water-cooling device to protect the lens form overheating.
The material of machine body experienced with annealing process to relieve stress and make it more ductile and stable, which can keep machine functioning smoothly on the high power condition.
Cast aluminum beam experienced artificial aging treatment before the finishing machining, which makes its hardness level be T6, together with abrasion resistance and oxidation resistance. The beam is very light because of aluminum material, which makes the speed of manufacturing higher.
Parameters| Model | PS3015 PS4015 PS4020 PS6020 |
| Working Area | 3000*1500mm 4000*1500mm 4000*2000mm 6000*2000mm |
| Laser Power | 500W 800W 1000W 1500W 2000W 3000W 4000W 6000W |
| Laser Wave Length | 1064nm |
| Working Table | Sawtooth |
| Maximum Idle Running Speed | 1200mm/s |
| Position Accuracy | ±0.05mm/m |
| Position Speed | 20m/min |
| Minimum Line Width | ± 0.02mm |
| Cutting Thickness | ≤24mm |
| Control System | Cypcut |
| Position Type | red dot |
| Power Consumption | ≤12KW |
| Working Voltage | 380V/50Hz |
| Auxiliary Gas | oxygen,nitrogen,air |
| Working life of fiber module | More than 100000 hours |
| Fiber laser cutting head | Lasermech made in USA |
| Focus lens | Lasermech made in USA |
| Driver system | 1500W Fuji servo motor made in Japan |
| Liner guider system | PMI made in Taiwan , (Option THK made in Japan) |
| Transmit system | Dual Rack & Pinion type |
| Rack system | made in Germany |
| Chain system | Igus made in Germany |
| Warranty time | 3 years |
- Kitchen sink
- Advertising words
- Enclosure
- Lamp housing
