Suspension Assembly for ADSS
Cable Fitting / Suspension Fitting / Aerial Fiber Suspension
Features
a. The suspension assembly for ADSS cables features large contact areas between the suspension clamp and ADSS cable for outstanding stress distribution, protecting the cables for long useful lifetimes.
b. Good dynamic stress. It can provide enough grip strength (14%RTS) to ensure the safety of the ADSS cable under long unbalanced loads.
c. Flexible rubber block for enhanced self-damping and abrasion reduction.
e. Rounded ending improves the corona voltage.
f. Excellent aluminum alloy material for a longer service life thanks to its mechanical strength and corrosion resistance.
Purpose
Supporting ADSS cables.
Our company provides product installation instructions. For detailed information, please see the
| Model | Span (m) | Length of inner rod (mm) | Length of outer rod (mm) | Clamp strength (kN) |
| 100 | 1100 | 900 | 30 | |
| 200 | 1200 | 1000 | 30 | |
| 300 | 1300 | 1100 | 30 | |
| 400 | 1500 | 1200 | 50 | |
| 500 | 1700 | 1300 | 50 | |
| 600 | 1900 | 1500 | 70 | |
| 700 | 2000 | 1600 | 70 | |
| 800 | 2100 | 1700 | 70 | |
| 1000 | 2300 | 1900 | 70 |
Note: ** represents the cable diameter.
Caution:
a. Select the suspension clamp according to ADSS cable span, diameter, RTS and other relevant parameters.
b. Configuration: 1 set/ straight line tower.
c. If the clamp needs to be installed with an anti-corona ring or damper, the length of the inner rods should be lengthened, depending on design requirements.
d. Clamp strength: 30kN, 50kN, 70kN.
