Fiber Laser Marker, FOL-M Series
Request a Quote
FOL-M series fiber laser marker can mark trademark, model, production date, serial number or other texts or patterns on most metal materials and a few non-metallic materials.
Applicable materials:
Plastic, steel, stainless steel, aluminum-magnesium alloy, zinc alloy, copper, nickel plating material, galvanized material, alumina, etc.
- Fiber laser marker marks materials with thin and condensed light beam which ensures small heat affected zone and high processing efficiency.
- This machine is equipped with high-speed scanning galvanometer mirror system. Its minimum line width is 0.015mm.
- It has a human-oriented operation system which is convenient to use.
- The control software of this fiber laser marker is compatible with various graphic formats.
- Its marking effect is permanent and won’t deform.
| Model | FOL-20M / FOL-30M / FOL-50M |
| Laser power | 20W / 30W / 50W |
| Laser type | Fiber laser |
| Machine power | 500W |
| Minimum line width | 0.015mm |
| Wave length | 1064nm |
| Marking speed | 8000mm/s |
| Marking Area | 50*50/110*110/150*150/200*200mm/300*300mm (optional) |
| Operating voltage | AC220±10% 50Hz / AC110±10% 60Hz |
| Cooling type | Air cooling and protection system |
| Acceptable graphic format | PLT, PCX, DXF, BMP, AI |
| Operating temperature range | 15-35°C |
| Minimum character | 0.15mm |
| Repeat position accuracy | ±0.001mm |
| weight | 50kgs |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
