75 Fascia Signs Clip-In Metal Panel Machine
Roll Forming Machine
This kind of roll forming machine is used to produce a variety of clip-in metal panels for fascia signs. Those clip-in metal panels are normally used as wall claddings with features of a nice exterior, high mechanical strength, easy installation, low price and strong wind resistance etc. They are extensively used for billboards, building wall decoration, interior decoration and various types of packaging applications. You can rest assured that this architectural roll former will not cause poor color retention, uneven surfaces, glue failure and other potential problems after construction.
This wall cladding machine is best known for its easy installation. You are only required to fix the supporting frame and then mount the color-coated, clip-in steel panels on this frame for commercial advertising purpose. The clip-in colored steel plates used for the latest version of outdoor billboards come in a width of 75mm and a maximum length of up to 6m. They can be spliced together without leaving any gaps, thus helping you save lots of materials. This metal panel can be installed vertically, horizontally or from different directions. It can work with different supports to produce a maximum gap of up to 60mm and also offer a choice of various colors.
Technical Parameters of the 75 Fascia Signs Clip-In Metal Panel Machine
Dimension of Pre-cutting Equipment | 3000mm *500mm*900mm |
Motor Power | 0.75KW |
Electrical Control System | PLC-based industrial computer control system |
Working Speed | 380-400m/h |
Thickness of Feed Material | 0.4mm |
Width of Feed Material | 110mm |
Effective Area after Rollforming | 75mm |
Forming Roll Material | 45# steel, Surface: hard chrome plating |
Frame Material | 180 steel channel |