Wheel Loader YFN-3
Wheel Loader has optimized the connecting rod mechanism, whichimproves the breakout force and the work efficiency, shortens the movement timeof working device. Under the premise of ensuring its front and back frameintensity, its structure is more rational and its maintenance is moreconvenient. With novel outline, the vision of the driver is more open. The cabof Wheel Loader can install air condition optionally and provide a comfortableworking environment. It is a kind of construction machinery.
Specifications
Operating weight: 28500kg
Bucket Capacity: 4.5m3
Rated Load: 8000kg
Maximum traction: 260kN
Grade ability :30°
Breakout force: 260kN
Engine: CUMMINS
Rated Power: 231kw (310hp) @ 2100rpm
Peak Torque: 1426Nm @ 1300rpm
Displacement: 10. 8L
Cylinders -Bore x Stroke: 6-125x147mm
Transmission type: counter shaft-type power shift, semi-automatic electrical hydraulicshifting control
Converter: single-stage, single-phase, three elements torque converter Travel
Technical Parameters
| Speeds (km / h) | Gear 1 | Gear2 | Gear3 | Gear4 |
| Forward | 7.3 | 12 | 24.5 | 35 |
| Reverse | 7.3 | 12 | 24.5 | |
Steering
Articulated frame, full hydraulic power with flow amplified system, full-flow filtering.
Axles: ZF AP420 / R
Self-locking differentials and went multi-disc brakes
Brakes
Full hydraulic wet-disc barking.
Service brakes: All wheels use wet multi-disc brakes.
Parking brakes: Shoe-type brake, operator applies electronic-control.
Emergency brakes: Using parking brake, the brake will automatically / manually apply.Equipped with braking low-pressure warning.
Hydraulic System
Relief valve setting: 20.7MPa
Hydraulic cycle time, rated load in bucket (in second)
| Raise | Dump | Lower (empty, float down) | Total |
| 6.3 | 1.5 | 3.8 | 11.6 |
