Conveyor

Request a Quote

View All: http://jrseparator.com/3-3-conveyor-system.html

Great for use as food service equipment on a moderate incline of less than 20 degrees, the LS series screw conveyor is pre-dominantly employed to handle powders, fine particles and small lumps at a temperature lower than 200°C, such as cement, coal powder, food, fertilizer, coal ash, and sand.

Built to industry-leading specifications, the screw conveyor features a unique design as bearings for head and tail sections are installed outside the housing. Rotary center shaft can come with either a sliding contact bearing or a rolling contact bearing. Both bearings are sealed to keep out dust. A clean-up device is installed at the outlet end.

Also called auger conveyor, the screw conveyor is quiet running, easy to repair and suitable for a variety of bulk materials in food processing and animal feed pelleting industries. Customers can choose the position of inlet and outlet.

Technical Specifications

Model	200	250	315	400	500
Screw Diameter	200	250	315	400	500
Screw Pitch	200	250	315	355	400
Rotational Speed (r/min)	100	90	80	71	63
Throughput (m/h)	13	22	31	62	98
Rotational Speed (r/min)	80	71	63	56	50
Throughput (m/h)	10	18	24	49	78
Rotational Speed(r/min ）	63	56	50	45	40
Throughput (m/h)	8	14	19	39	62
Rotational Speed (r.min)	50	45	40	36	32
Throughput (m/h)	6.2	11	15.4	31	50

Operating typically in low decibels, the TGSU series scraper conveyor runs smooth and straight, all the while leaving no residuals inside the trough. Quality bush roller chains, paired with small-pitch sprockets at both ends, ensure stable transmission. Scraper plate scrapes dust off the trough.

Alarms would go off in the event of clogging or chain breakage. A simple structure facilitates repair and operation. Packing is used for stationary seal which increases the life of bearing all the while keeping dust from leaking outside. Ideal for horizontal material transfer.

Technical Specifications

Model	TGSU16	TGSU20	TGSU25	TGSU32	TGSU36	TGSU40	TGSU
J-style Trough Diameter (m)	160	200	250	320	360	400	500
Chain Pitch(mm)	60	60	60	80	80	80	100
Speed(m/s)	0.35-0.6	0.35-0.6	0.35-0.6	0.35-0.7	0.35-0.7	0.35-0.7	0.35-0.7
Throughput (t/h)	10-25	25-30	30-45	45-80	80-120	120-150	150-260

Other Images