Ball Mill
Ball mill is mainly made up of feeding part, discharging part,gyration part, transmission part (reducer, a small transmission gear, motor,electronic control) and other parts. Its quill shaft adopts steel casting. Itsliner can be dismantled and changed. The rotary gearwheel uses casting gear
Wet Overflow Ball Mill
Large ball mill is specially equipped with:
1.Jacking device which is handy for maintenance.
2.Dynamic pressure and static pressure bearing which makesoperation smooth and stable.
3.Low speed driving device which is handy for maintenanceand start..
4.Oil atomization sprayer unit which ensures reliable lubricationfor the pinion wheel and gull gear.
5.Air clutch flexible start.
Parameter of Wet Overflow Ball Mill
Model | Dia.of cylinder (mm) | Length of Cylinder(mm) | Motor | Motor power (kw) | Rotating speed of motor (r.p.m) | Length (mm) | Width (mm) | Height (mm) | Effective volume (m3) | Max load of balls (t) | Jacking device | Dynamic pressure and static pressure bearing | W (kg) |
B09 | 900 | 1800 | Y225M-8 | 22 | 730 | 5080 | 2300 | 2015 | 0.37~1.8 | 1.66 | — | — | 6078 |
B10 | 1200 | 1200 | Y250M-8 | 30 | 5023 | 2794 | 2540 | 0.2~2.3 | 2.4 | 11473 | |||
B12 | 2400 | YR280S-8 | 55 | 723 | 6112 | 0.35~8.2 | 3.8 | 12308 | |||||
B15 | 1500 | 1500 | JR115-8 | 60 | 5766 | 2945 | 2600 | 1.4~4.5 | 6.4 | 15424 | |||
B18 | 3000 | JR125-8 | 95 | 725 | 7979 | 2.5~8 | 10 | 18690 | |||||
B21 | 2100 | 2200 | JR128-8 | 155 | 730 | 8070 | 4840 | 3795 | 4.5~26 | 14 | 47800 | ||
B23 | 3000 | JR137-8 | 210 | 735 | 8870 | 6.5~36 | 20 | 49780 | |||||
B26 | 3600 | 9300 | 8~35 | 22 | 52010 | ||||||||
B25 | 4500 | JR148-6 | 310 | 740 | 11029 | 4737 | 3300 | 9.5~52 | 23.8 | 58305 | |||
B24 | 2400 | 3000 | JR1410-8 | 280 | 9710 | 4778 | 4120 | 6.24~77.6 | 23 | yes | 65880 | ||
B27 | 2700 | 2100 | 9400 | 5600 | 4700 | 20~100 | 24 | 58000 | |||||
B36 | 3600 | TDMK400-32 | 400 | 187.5 | 11400 | 5700 | 4500 | 10.5~120 | 38 | 70000 | |||
B40 | 4000 | 11850 | 5667 | 4496 | 30~130 | 40 | 78800 | ||||||
B31 | 3200 | 3100 | TDMK630-36 | 630 | 167 | 12750 | 6760 | 5150 | 80~100 | 45 | yes | 107660 | |
B45 | 4500 | 14600 | 5200 | 86~110 | 61 | 120875 | |||||||
B54 | 5400 | TM1000-36/2600 | 1000 | 15800 | 90~145 | 73 | 129180 | ||||||
B64 | 3600 | 4500 | 15000 | 7200 | 6326 | 35~150 | 76 | 135000 | |||||
B65 | 5000 | TM1250-40/3250 | 1250 | 150 | 17157 | 7755 | 40~178 | 86 | 145000 | ||||
B60 | 6000 | 19000 | 106 | 102 | 154000 |